When we try to turn the toy on it just gets stuck at the screen that says Leapfrog. It's on an a/c adapter so it's not a battery issue. We also tried it with and without a game cartridge. It hasn't been dropped or exposed to water. It just randomly turned itself off and then wouldn't turn all the way back on.
All of these are worthless answer given by bots.
Hold down the volume down, home key and the right directional key.....wait till it shows the usb cable icon. connect to your pc with leappad connect software....tune and then select repair.
Thank you!!!
×
SOURCE: Leapfrog Leapster doesn't read cartridges anymore?
HI my son has a LEAP frog MAKE SURE THAT THERE IS NOTHING OBSTUCTING THE CONTACTS( metal on the game and the cartdridge meet)
PLEASE RATE THIS HELP FiXYa EXPERTS HELP
SOURCE: My son's leapfrog didj will
This happened with the first Didj we bought. Struggled to open the battery case with the stupid recommended dime. [Use a screwdriver instead - better able to push down the lever inside the case.] The 1st Didj never turned on. Totally dead. Exchanged it. The second Didj was easier to open compartment to install batteries and turned on immediately. Reommend you take it back.
SOURCE: The screen on the Explorer
If the unit is frozen the first thing I would recommend is removing the batteries and see if its ok when you reinsert them.
SOURCE: Replacement Leap Pad Pen
Hi, I have found this pen on www.leappadpen.com
I hope that this helps?
Regards
SOURCE: I turn on my daughter's
You have to make sure that your Cartridges is clean. Try to vacum of blow both of the cartridge hole and also the place where you put the cartridge, Sometime very small tiny dirt will makes that the cartridge cannot be recognise by the console.
Instead of 1 starter game and a few demo game that you get from Leapfrog
Connect, you can also get more downloadable games for your Leapster 2.
You can get it here:
leapster-2.blogspot.com
3,427 views
Usually answered in minutes!
×