Can not download my pictures from camera

Fixya cannot install software on any equipment, for the user's own protection

There's no need for a CD-you can download EASYSHARE Software for free!
(If you're running MAC OS, you have the option of using APPLE iPHOTO-bundled with your computer-to transfer, edit, and share pictures.)

1. Locate and select the software for your computer-WINDOWS or MAC.
2. Follow the instructions to download and install the software.

Install the Software of your camera in the your laptop by using the CD which came with your camera...after that whenever you will connect this will work finely...

Yesterday, did you use the computer to delete the older pictures? Don't ever do that. For now, you can use a card reader to download your pictures to your computer. After they are safely downloaded, format the card in the camera and don't let it get that full again.

Doing a search on Sony's website for your camera got me the following link:

http://esupport.sony.com/US/perl/swu-list.pl?mdl=DSCW150&SelectOS=7#div_pos_124

It says that if you lost your installation CD, use the Picture Motion Browser software download tool.

Good luck.

1. To download pictures from Camera to PC/Laptop, you can goto Start >> My Computer.

2. Here you will see a icon of "Removable Drive" (Camera).

3. Just open it and copy all your pictures to the PC.

4. You can also download the Canon Powershot Software from.

User Guide : http://its.lafayette.edu/downloads/pdfs/manuals/CanonPowerShotA530Manual.pdf

Driver Download :
http://software.canon-europe.com/products/0010333.asp
http://driverscollection.com/?H=PowerShot%20A530&By=Canon


please rate this advice if it helps....tc! :)

How do I transfer pictures on my digital camera to my computer?

AFTER INSTALLING THE SOFTWARE FIRST, WITHOUT THE CAMERA BEING CONNECTED TO THE COMPUTER, DOTHE FOLLOWING: 1. Turn on the Camera, and change it o "Playback" mode. 2. Connect the camera with computer using USB port. 3. The LCD display of the camera turns off automatically, and the computer said " that a new hardware attached would be detected". 4. Go to "My Computer", and you can find a new drive saying "Removable disk". Double click it and you can find your pictures and videos inside the folder. Just copy them to your computer's hard disk. This procedure is slightly different for each digital camera model. You will need to refer to your instruction manual (Included on the CD-Rom that came with your camera) for exact instructions on how to properly install your camera and download your pictures. The main thing is to first install all of the software on the included CD-Rom disc to your computer BEFORE CONNECTING THE DIGITAL CAMERA TO THE COMPUTER. If you do not do this, Windows will put in its own driver and it is virtually impossible on some computers to get this driver out of Windows and install the proper one. However, if you do find yourself in this position. You can TRY the following. First unhook the camera from the computer, go to: Start / Control Panel / Add/Remove Programs. Next, look for all of the DIGITAL CAMERA software listed under the "Installed Software List" and uninstall that software. This is the same software you HAD installed after hooking up the camera to the computer. Once you have uninstalled ALL OF THE CAMERA software, reboot the computer, then re-install the software WITHOUT the camera connected to the computer. If this works, great! if not it is because Windows refuses to accept the new digital camera driver or Mass Media Driver needed and short of reinstalling the Windows software there is very little you can to do to make it work other than by purchasing a different model digital camera and installing the software FIRST before attaching the camera to the computer. If you think this is just a Cobra Digital problem, do a search on the internet. It occurs with almost all brands of digital cameras on the market, usually the ones that use proprietary drivers instead of mass media drivers.

Hi,

Setup :

*NOTE: DO NOT connect the camera to your computer before installing the software.*

To install the software, insert the Logitech camera software CD into your computer's CD-ROM drive.

Or

You can download the latest vista drivers from here, this link will give you the instructions on how to download the drivers with the images.

http://tinyurl.com/6ruwav

Using the CD :

The Setup screen should appear. If it does not, please perform the following steps:

Click Start and then Run.

Type D:\Setup.exe and press the Enter key.

Follow the on-screen instructions.

Using the Downloaded file :

Double click on the setup file.

Follow the on-screen instructions.

After the computer reboots, the driver installation for the camera will start. Do not connect the camera until the setup prompts you to connect the camera cable to your computer.

While the driver installation progresses, remove the camera and camera base from the packaging and mount the camera on the camera base.

When prompted, plug the camera into the USB port. You should see the following diagram to let you know where to plug the camera in:

After the installation is complete, the camera should be ready to use.

We have done the drivers installation which are needed by the computer to ecognize the camera.

Setup instructions to work with the camera :

http://tinyurl.com/585der

Hope this helps.

Good Luck.

Live, Love,Laugh.

In Windows XP, right-click [My Computer]: Properties: Hardware tab: [Driver Signing]: choose Warn, and accept the driver when it asks you.

i need driver creative labs.inc model no pd1100 n10225 cv11004384004538 EMAIL ME [email protected]