System is rarely used & has suddenly decided that it will not accept CDs into it's CD drive. It just ignores CD when offered into slot. Have reset system & firmware to no avail.Please help.
My system do not want to read CD's since couple of month. Symoply saying : NO CD even when stanadard Cd is into the WACS.
any suggestion ?My system do not want to read CD's since couple of month. Symoply saying : NO CD even when stanadard Cd is into the WACS.
any suggestion ?
I had the same problem, i have now upgreaded the firmware off the philips site it was released in 2007 and mine had already been done but i did it again and it accepts the CD now, I just need to get it to read the whole cd content
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think that the mechanism of the cd accepter must be not accepting the cd due to blockages such as dust or sand particles. If you are experienced, open the case and try to find blockages. If problem persists, Call the company's support.
Since you are able to put the CD in the drive, that means there is power. Therefore, there are no issues with the cable. So: 1. Try reading your CDs on a different computer. If you CDs are readable, that means there's something wrong with your drive. If not, there's something wrong with your CDs. 2. If you have conclude that it is indeed your CD drive that's not functioning properly, try restarting your computer then navigate to the CD drive to see if your computer detects it. If not, replace the CD drive.
CD loading not working....
On most CD/DVD players, the transport tray is moved via a gear-toothed sprocket connected via a pulley and rubber drive belt to a motor pulley.
So failure to move could be the thin rubber drive belt has snapped, come off, or gear-drive has overshot, off its sprocket.
The procedure to fix is outlined in the TIPS of Fixya.
Try to use dvd cleaner disk to clean the lens, if it doesnot work, i think you have to replace your drive , this happens with Dell alot. but try to clean it, uninstall then install the driver back and check if its work.
My Epson rx700 will not recognise any generic ink catridges and won't allow me to accept any of them like it used to. It used to offer the facility to accept generic catridges but suddenly has decided not to accept any.
see if it can still boot the cd , put in a windows cd go into the bios and set the cd as boot device in boot order. save and exit with cd in drive you will get a prompt at boot to press any key to boot cd do this and let it run until the next prompt screen then exit . if it never will boot the cd , time to replace drive.
that's a printer settings issue...when you open the print dialogue..go to print preferences, and make sure you are selecting the printer, and NOT print to file
My system do not want to read CD's since couple of month. Symoply saying : NO CD even when stanadard Cd is into the WACS.
any suggestion ?
i got sam problum wid my system it does not accept cd
i have the same problem
×