Memory card error

The 7960 works with SD cards. It does not work with SDHC cards such as your 4GB card.

SD cards max out at 2GB. While SDHC cards are physically identical, they are electronically incompatible and will not work in devices not designed for them.

The Canon SD1000 will work with SDHC cards, up to 32GB in size. Stick with any of the major brands and you won't have problems.

The HP 7350 will NOT work with SDHC cards, limited to SD cards 2GB and smaller.

Hello, sorry can't give you a definitive answer, but take a look at HP's take on the subject of supported memory cards. Link is below. Regards nicam49
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00059994&cc=uk&lc=en&dlc=en&product=1156652&tmp_track_link=ot_search

1. Verify that the printer is turned off.
2. Remove the Secure Digital memory card from the printer.
3. Examine the Secure Digital memory card:
   • Is the lock switch in the unlock position?
   • Are there any visible discolorations or defects such as crack or nick in the card?
   • Are there any contacts missing from the end of the card?
   • Are there any deep scratches in the card contacts?
   • Is there any heat discoloration on the card? NOTE: If all of the above questions result in No , proceed to Step 4.
4. Check if the HP Photosmart printer supports the file format. NOTE: In order to know which file formats are supported by the different HP Photosmart printers, please refer to the manual of your printer.
5. (Saving the pictures on the PC, if possible) Insert the Secure Digital memory card in the camera (or another device) and format it following the proper instructions to perform it.
6. Capture an image.
7. Review the image. If the image is corrupted or an error such as Unsupported Image File is displayed, the Secure Digital memory card is suspected to be defective and should either be replaced or referred to the manufacturer for further troubleshooting.
8. If the images are read properly, turn on the printer. Insert the Secure Digital memory card in the Secure Digital slot.
9. If the printer display continues to show the Card Not Recognized error, try using another Secure Digital memory card, if one is available.
10. If the printer is still unable to read a functional and compatible Secure Digital card, contact HP to obtain additional troubleshooting information.

Well SD max is 2gb, so you can get 2gb if you want.

SDHC max is 32gb. If you are not on a budget, try upgrading your printer to a newer model.

SDHC is coming out with even newer models, now with a class 10 (10mb read/write speed - but very costly).

However, if it doesn't matter to you, might as well just stick with the same printer, since SD cards are coming down in price. Just make sure you get 2gb cards with a good class speed.

Hi

Whats the memory size of your SD card? this printer only support 1gb card.

Thanks for using Fixya

Try formatting the memory card

Previous solution is the FAIL. Original poster says it works fine in _camera_, but not in _printer_. _Printer_ is the compatibility issue, not camera.

You are using a new camera with an old printer.
Check the following:
- Try using a 1 to 2 GB SD card. The printer may not be able to hande one this size.
- Try taking a photo, in a smaller resolution, and save as JPG.
- Try plugging in the camera to the printer and print from the camera.
And the best option, is to transfer your photos to your computer, and print from there.
Take a look at a program called "Thumbs Plus" it has worked well for me. http://www.cerious.com/

If you have lost your manual, see: www.HP.com/Support for other answers.

From what read of the specs, the C6100 does not support SDHC cards, only SD cards. SD cards top out at 2GB; what you have is technically an SDHC (High Capacity) card, which does not work in SD devices.