Question about LeapFrog FLY Fusion Pentop Computer

1 Answer

My fly pen top computer is not turning on at all

Posted by tigerlover12 on

  • 4 more comments 
  • sierraasaka Jan 16, 2009

    my pentop wont connect to the computer

  • GHuber3877 Jan 18, 2009

    I need to change the battery and I have lost the manual

  • Anonymous Mar 03, 2009

    My Fly Fusion Pentop Computer is connected to my computer, but it won't light up or charge or respond to the computer.

  • icossa1 Mar 22, 2009

    my pentop wont turn on or charge

  • Anonymous Apr 11, 2009

    My pen is not turning on at all. I jsut go it and when I tried to test it out it would not turn on, even when I plugged it in to the comp.

  • gret444 Aug 09, 2010

    Has anyone been able to solve their problem... regarding the pen not turning on? I'd like to talk to anyone who has one of these pens and can not get it to turn on even when it's connected to their computer.




1 Answer


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Just leave it hooked to the comp for a while. than le it hooked an turn it on. wait till the compu loads

Posted on Jan 15, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Please advise how I can obtain a new Fly Buys card?

Fly Buys FAQs ' Can I get a new Fly Buys card?
  1. Cached
Nov 14, 2017 - Go to Account at the top of the page and select 'Members & cards' (you'll need to be signed in to do this) Click on 'Members & cards' in the sub-navigation and choose 'Replace this card' on the one you want. Choose a card design and double check your name, and hit 'Request New Card' at the end.

Fly Buys FAQs ' How do I get a new Fly Buys card?
  1. Cached
Nov 14, 2017 - If you are not sure, you can find your card number on the top of the emails we send you. However, if you've lost your card and don't know your Fly Buys number, call 0800 FLY BUYS and one of the team will get a replacement card sent out to you.

Fly Buys FAQs ' Can I get extra Fly Buys cards for my account?
  1. Cached
Apr 5, 2017 - Go to Account on the top right-hand side of the page and select My Account (you'll need to be signed in to do this); Click on 'Members and cards' on the left-hand side; Click 'Add a new member', fill out the form and choose your card design; Sit back and wait for the new cards to turn up in the post (they take ...

Fly Buys
  1. Cached
  2. Similar
Follow the prompts to access Fly Buys online and through our mobile apps. Do you have a Fly Buys number? Enter your number to register. You need to enter a Fly Buys number to start. GO. ? OR. New to Fly Buys? Join today. Create account. Earn points at places across NZ, then use them to get free stuff... obtain new Fly Buys card Google Search

Feb 15, 2018 | Computers & Internet

1 Answer

My FLY Fusion Pentop Computer won't turn on, but when it is connected to the computer the light turns red

Try leaving it hooked up to the computer for a while then after maybe a few hours try to turn it on again.

Jan 25, 2010 | LeapFrog FLY Fusion Pentop Computer

1 Answer

We have lost the book that tells us how to work the fly pen can you help

If you go to the LeapFrog Website and at the bottom select customer support you can then select the fly fusion.  The guide you are looking for is entitled "Fly Fusion Parent Guide" I know it's not named the way it should as it is a general guide and not just about account administration.

Jan 12, 2009 | LeapFrog FLY Fusion Pentop Computer

1 Answer

Fly pentop Q

no the on in the link is a fly pen 1.0 the one where you have a usb on the top is the fly pen 2.0

Jan 07, 2009 | LeapFrog FLY Fusion Pentop Computer

1 Answer

The fly pen is not turning on

it just has to charge. whn i turns d its charging. leave it for 15min andn take it out and turn it on. if it doesnt tn on contact an expertfrom the place u got it.

Jan 01, 2009 | LeapFrog FLY Fusion Pentop Computer

1 Answer


not sure if u have tried this my friend,, but on the fly wheel side of the bike,, or left of the bike as u r sat on it,,is the casing covering the fly wheel,, on that casing u will see a screw ,ie looks like a nut ,, undo that to reveal in the hole a little bit of the fly wheel,, shine a torch down it and turn the engine over by hand or put it gear and rock it ,so the fly wheel turns eventually u will see a tdc mark or line engraved on the wheel,, ,,in the hole u r lookin down will be a pointer or small arrow on the casing,, line the to up ,,and then take the spark plug out and just lightly put a screw driver down the hole of the cylinder, it should be at the top of its stroke,,turn the engine over once to make sure the piston is as top dead centre,and the mark on fly wheel line up,, if u r using a strobe light it will be 10% b4 top dead centre.. any probs ,,e mail me, 4 the other solution,, [email protected]

Dec 20, 2008 | 2006 Yamaha DT 125 X

1 Answer


well couple of general thing:

• When your pen runs out of ink, don't throw it away, replace the ink
• Includes 2 cartridges
• Stock up for your Pentop
• For use with FLY Pentop Computer (sold separately)
• Blue ink

Oct 07, 2008 | LeapFrog FLY Fusion Blue Ink Refills

1 Answer

Powering on

OK ... after a lot of trial and error, I got mine to work. I think it may be a really low charge or something. I had to press the power button until it was completely dark ... no flashing faint green or any colors. Then when I plugged it in, I got a solid red and left it for awhile. Then when I pressed the power button I got yellow, red and green ... the computer recognized it and then got a solid yellow.

Before when I had it plugged in, I'd get a lot of red random flashing ... and it just didn't seem to charge at all ... even after a full day.

I think the issue was that it was in this "flashing state (red when connected, very faint green when disconnected)" It wasn't easy to get it to turn off completely. Most of the presses of the power button didn't change the state at all. But if I got it just right, I could see the faint green light go off. That's when I plugged it in and got a solid red light, and eventually a good charge.

Hope this works for some others.

May 23, 2008 | LeapFrog FLY Fusion Pentop Computer

1 Answer

Shaking, Skipping Pointer

if wireless or usb

check mouse and pen device settings on pc

if no better
new mouse and pen

Mar 22, 2017 | Wacom Graphire3 Tablet 6x8 (C267252627)

Not finding what you are looking for?
LeapFrog FLY Fusion Pentop Computer Logo

Related Topics:

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top LeapFrog Toys Experts

Nikki  Mclean
Nikki Mclean

Level 2 Expert

293 Answers

Crystal Walters
Crystal Walters

Level 1 Expert

19 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32389 Answers

Are you a LeapFrog Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides