How can i set an alarm for my sharp ei6890s - Sharp EL-6890

Press the Set Time button.

https://www.google.com/search?q=Sharp+alarm+clock+SPC005+manual

..

https://prezi.com/vgxxmjfbc1ya/sharp-alarm-clock-inustructions/

Sharp Alarm Clock Inustructions

The SPC900 has 2 alarms. On the back of the unit there is a buttion labeled "Alarm On/Off". Press the that button to cycle through the alarm on/off possibilties. On the screen you will see what alarm(s) is (are) turned on. There are4 possible settings: off (no alarms displayed), alarm 1 only, alarm 2 only or both alarms. The indicators are just above the seconds display and to the right of the big hour/minute display.

hi cheryl.
this is all i could find,if this does not work go to the link and the bottom.
How to set time on sharp alarm clock? Change switch to BUZZER. 3.) Press and hold the ALARM button on top of the clock. 4.) Press HOUR button until desired hour is displayed.12 Feb 2013

Sharp Alarm Clock Inustructions by Matt Boysen on Prezi

https://prezi.com/vgxxmjfbc1ya/sharp-alarm-clock-inustructions/ Search for: How to set time on sharp alarm clock?

instructions setting sharp alarm clock SPC293 Google Search

How do I set the day on my sharp spc798 dual alarm digital clock?

http://www.manualsonline.com/support/sharp/watch/

press all buttons in same time wait for 3 -5 beeps . might be 1. will re set the whole watch. then you need to rest time and day and dont set the alarm!

go to the al mode and the just tap the set button. If you hold the set button down it will try to set the alarm. so just tap it and it will change one timezone per tap.

Instructions for Sharp Alarm Chrono (Digital)

Push "Mode" button until the mode is shown that you want to reset, do this even if the mode you want to reset is all ready showing.

Push "Reset", continue pushes until the desired Parameter (Minute, Hour, or Second) is flashing.

Use "Start" button to advance the digits to the desired setting.

Push "Mode" Button to finish.