Hardware installing problem

it looks like the motherboard manufacturer is gigabyte. hope this helps

yes y7ou can get6 it from site gigabyte.com

After installing the operating system you have to run the mother board driver disc , which will provided with the PC pack itself. or else if you have cd and also not detecting the driver means follow this , right click the my computer goto properties goto hardware and select device manager in that you can see a small speaker shaped icon with yellow color ques mark , by right clicking the specific icon goto update driver option and goto "yes this time only" option and next, select "manaully search" option you will find a window in that enable the browse option , so you can locate it to *********** board cd location and then click next to analyse the disk and ask you continue anyway option if u proceed you can fix it. Thank you don forget to vote for me .

Remove newly installed hardware in your computer. It is causing the problem and then install the Operating System again.

yes you can easily download from this website
http://www.drivers-software-download.org/tag/hcl-notebook-k19-pdc-t2060

hey dude, what is the model of your motherboard...

hcl mother board cd lost
intel Core due inside
serial no 8093A1052285
i want to a mother board cd
for xp vista

SIR..., regarding monitor...display block characteristics which is operated manually by buttons situated bottom of monitor is anytime coming at the centre of monitor display... The settings block comes on suddenly and we are unable to exit from the same sometimes the block goes off without any action and everything is fine till it is back again and it is come again and again.....by all this i did'nt work on my PC...all result it's useles......please sir giving your suggestion as soon as possible....... This has been happening for the last 1 year and is a real pain Please send some solution

The sound quality built in to most mother boards is not the best quality. It is a compromise. The best solution is to install a high quality sound card in an available slot.

For video quality, it is the same issue when it comes to high quality video.

Before installing the new sound card, uninstall the existing sound drivers and sound software for the built in sound as necessary. You may have to go in to the BIOS set-up and dissable the mother board's built in sound. It is best to consult the instructions for *********** board to know the details for the particular mother board. You should contact the dealer for your computer to have proper details.

Turn off the computer, and disconnect the AC cord. Open the case, and install the new sound card according to the instructions that come with it.

When the computer re-starts, it should tell you that it found new hardware. Go through the installation procedure. There will be drivers and some software and drivers that must be installed.

If you are not used to this type of procedure, it would be best for you to take the computer to a computer service place and have them do the installation for you.

Jerry G.

Stop Messages During Installation An unsuccessful attempt to install Windows 2000 can result in a Stop message. When this happens, first check that the computer and all of its peripheral hardware are compatible with Windows 2000. To do this, refer to the latest Windows 2000 Hardware Compatibility List (HCL). Microsoft compiles the HCL through rigorous component and compatibility testing of computers and peripheral hardware to determine if they work well with Windows 2000. For more information about the HCL, see "Additional Resources" at the end of this chapter.
If the hardware you use is not included on the Windows 2000 HCL, contact the hardware manufacturer as a first-line resource for available information, newly tested hardware, and Basic Input/Output System (BIOS) and firmware revisions. Reducing the number of hardware components by removing nonessential peripherals and devices can help you pinpoint installation conflicts as well.