O2 Pocket Pc stopped working after upgrade installation
I just bought an O2 Xda II mini form my friend (waranty expired). The device was working fine with windows moble. I dont know much about such devices, and i wanted to upgarde it. So i downloaded this upgrade/rom from the O2 website. After installation the the machine does not turn on at all now.
The battery is fully charged and I tried the master reset but nothing worked. When i connect it to the usb it shows: USB V1.00, and when i connect it to the power supply is shows: Serial V1.00. When i do a master reset sometimes a red light flashes.
Can you please help me and if you know the problem, why it happened.
Thank you very much
Flash arom directly from bootloader mode (by pressing camera ****. and keep press. then press with sylus the soft reset ****. ,
then the 3 colors shows with usb in left bottom site of screen of device then run the flash utility normally .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Kumar, Nice to find u here . Do u have upgrade of XDA II Mini. I m on original version. Havent used this set in a while as i m on Iphone. So i was wondering if u can help?? Hoping to hear soon, Thnx
I have an O2 Xda IIi Smartphone, i also connect my handset to my PC,but I've Require software for PC suite yet, do you mind to help me to give a Require software so that i can connect my O2 to PC?Please help me,,,,,if you aren't mind, please give me this software and send to my email. awaiting your responds thanks.
I would say that either the upgrade package is not compatable with your device and has not installed anything beyond flashing/deleting the current installed eeprom info (no info on the eeprom at all) or the device has been restarted or uplugged during the flash eeprom stage, the factory/master reset should take you back to config mode at least, when trying the master reset the power should be on, then activate the master reset with a paperclip or pin only will work, press and hold until the red light goes out, remove the pin or paperclip activator and your device should power up as normal with the old eeprom info or ready for new eeprom info to flashed onto it if you are successful here ensure you use the istall package that came with this device Should be WinMobile/II or IIe I think.