Question about LG Flatron F900P 19" CRT Monitor

1 Answer

Small scratches and watermarks that I can't get rid of.

I recently bought a second-hand F900P and lately I have started to notice some minor, barely visible scratches and watermarks on the surface of it. The marks are so dim that you can only see it if you reflect light in the room to the monitor so they are not really very disturbing. Still, no matter how much i try to clean it (I'm using EMTEC Screen Cleaning fluid) with paper napkins they just wont go away. How do I get rid of them? Are these scratches and watermarks small damages on some outer coating of my monitor screen? If so, how do I get rid of the coating and would it even be wise, considering they aren't all that disturbing in the first place? Thanks in advance =)

Posted by Anonymous on


1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Best left alone me thinks- you may EMHANCE the damage.

Posted on May 22, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


On the Telescope Micro - Motion Rod I have noticed very dull faint scratches. What should I do to get rid of them

Firstly, please do not repeatedly ask the same question - this is more likely to get you ignored than obtain an answer.

Secondly, unless these scratches are affecting the use or performance of the item, ignore them. Should they need treatment, take the equipment to your nearest service centre.
Sep 07, 2019 • The Optics

How can I get rid of the coloured lines?

you should do the following tasks:
Press the left side of the TV with your hand, if the colors got disappeared, fortunately the flat cable inside the TV causes the problem. But
If the problem still insists, the panel board inside the TV got corrupted and you must change it with a new one.

Swatch diaphane second hand stuck

Hello, a week ago the small second hand (not long chrono second hand) got stucked and my irony swatch just stop moving. Although the chronometer could be running if started... The small hand just didn't move.
I tried different tricks, like removing battery, pull out main wheel and use chrono buttons to reset arms. Etc.
Today I noticed that when turning the wheel backwards a couple of times (one or two hours back) the little hand moved one second back... Pushing wheel back to On possition made the small hand move forward one second and get stucked again.
Then I did this procedure a couple of times, at some point I turned the wheel back for a while (may be 5 full turns) and noticed the small hand moved more than one second (5, 10, 15 seconds backward)... when I noticed it was moving freely I pushed wheel to on position and noticed the small second hand was running normal.. I hope it works for some of you. Greettings from Canada

My mario cart does not operate it stops after choosing a character

Sounds like there is a problem with the game disk, most likely it being scratched and unable to load data. If you purchased the game recently, try returning/exchanging it for another copy. If not, you can try getting the disk re-surfaced. Many video/game/electronic stores that deal with second-hand games will often re-surface the game (probably for a small fee) which will remove the scratches from the disk and make it readable by the system.

Maytag washer (model PAVT244AWW). Won't spin. Don't know how old it is or its history, as it came with a home we purchased in October. Several times it's "walked" during the spin cycle. About 6 weeks...

Its the clutch ,And it sounds like it time for a new washer,the clutch is expensive and washer are cheap try a second hand store that sale scratched or almost new machines

I just bought the armani ar0142 but the second hand doesn't work. Is this normal?

Take closer look and you will notice the small seconds hand which should be working. The dig seconds hand actually is chronometer hand and will work only when the chronometer function is engaged. Push the top button once=chronometer will start. Push the top button once more=chronometer will stop. Push the bottom button once=chronometer will return to zero. Rate me, please.

Canon Ixus 95 is - Watermark on movies?!

Look in your owners should tell you how to disable teh watermark...that make is so you can identify your pictures if you post them somewhere...that way people cant copy and past without you knowing its your the finished(printed) shot it should be barely visable.

LG Flatron F900P Monitor

Just press select button for select correct input connector. PNP no driver required.

Squiggly lines in the center of the monitor

sounds like you have what are called dead pixels. This typically happens in monitors that are about 2+ years old. If you are still within warranty i would contact hp about getting it serviced.    
Not finding what you are looking for?
LG Flatron F900P 19" CRT Monitor Logo


Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts


Level 3 Expert

13435 Answers


Level 3 Expert

8092 Answers

Cindy Wells

Level 3 Expert

6356 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides