Scrolling Input Screen

I have a Mitsubishi Diamond Series. I can't turn on the unit with the remote. When I turn it on manually, the screen that shows the various input devices is in scroll mode and won't stop. I can get a piture but it's blocked by the input screen in scroll mode.

Jim Ellis May 11, 2007

Snake. As it turns out, the cicuitry was ok. The problem was in the manual control panel. One or more of the buttons was "stuck", virtually freezing out any other incoming signal. Now the buttons didn't "feel" stuck but the interface viewed one or more of the buttons in the engaged position. The solution was to have all the manual control panel buttons checked. The problem stumped the more junior tech that came out...but his boss had seen this problem before with the Mitsubishi Diamond Series.
levyk Dec 31, 2007

I have a 36" Sony Trinitron. Sequential numbers continue to scoll indefinitely in the upper right-hand corner and the manual (Menu, Channel, Display) and remote buttons no longer funtion. Volume is only accessible manually, but all manual buttons have the impact of advancing the channel by one.

The television is hooked up to TIVO and once the television is on channel 3, all non-remote television operations can be completed without problem through the TIVO remote. Volume and Power are the 2 remote functions that continue to be impaired.

1 Answer

Henry Thomas

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.
Master
1,074 Answers

Have tech take a look at your tv the problem is very technical for you to handle the vertical circuit is defected.good luck.a check should be made on the eeprom.

Posted on May 06, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Vizio TV Input Menu Scrolling

Have you got any other remotes in the room that could be faulty or interfering with the WDTV.
Also:
try resetting via the side button with the unit on.
resetting to factory defaults via the internet menu.
unplugging the unit from power for some minutes (not seconds).
Do all the above one after the other before using the WDTV.
Sometimes this helps particularity after a firmware update.
The input source of the TV can be changed either through the supplied TV remote or physical buttons located on the TV itself.
Changing input source using the supplied TV remote.

Press the INPUT button on the supplied TV remote.
The input source screen will be displayed on the screen of the TV.
Using the arrow keys, choose one of the input sources on the input selection screen.
Confirm the selection by pressing the Enter button.

Changing input source using the physical buttons on the TV.

Press the INPUT button located at the back of the TV panel.
The input source selection screen will be displayed.
To scroll through the options, press the INPUT button repeatedly. The last highlighted option will be chosen after few seconds.

Read full answer

Feb 19, 2020 • Vizio Televison & Video

0helpful

1answer

The screen shield of my mitsubishi HD 1080 diamond projection tv is scratched and shows rainbow color dots in some places. What can I do? Can I fix it? Replace it?

The outer screen on most models is clear and called a protective screen and prevents glare---if it has that it has 2 more screens behind it.

Getting at the outer on is not so easy---the entire frame for the screens has to be removed, the inner screens removed to get at the outer screen to remove it (if 3 screens you can do without the outer one except if it got scratched before--next will be the next screen behind it.

Check with mitsubishi to see if the screen that is damaged is available or not.

Read full answer

Oct 29, 2012 • Mitsubishi Televison & Video

0helpful

1answer

Hi – please help ….. I have a WS 55907 Diamond HDTV and I’m trying to connect my computer to the TV via the VGA connection. When scrolling through the INPUT options, the VGA display option does not...

Try turning the set off then reconnect the vga cable, boot the pc then turn the tv on and see if it recognizes it.

Read full answer

Nov 25, 2010 • Mitsubishi Televison & Video

1helpful

1answer

Mitsubishi HDTV 1080 Diamond Series/Model WS-55909. After a 45 minute power outage the TV won't turn on. The green TIMER light keeps flashing rapidly. Pushing the SYSTEM RESET won't correct the problem....

My unit has blurred halo colors around screen items (people,cars, building, etc.) and when I turn to the HD channels this seems to dissipate a little.

Read full answer

Dec 28, 2009 • Mitsubishi WS-55909 55" Rear Projection...

1helpful

1answer