Kodak C643 Error codes 111.0.0.-2

SOURCE: Kodak C643 Screen

Call up Kodak at 1-800-431-7278 select option 3 and they gave me a price for my C743 of $44.35 + $15.00 shipping, but still no luck on the internet but cheaper than a new camera.

Posted on Feb 08, 2008

Karl Whisenand

• 1554 Answers

SOURCE: Kodak C643 died...

the pics on the memory card should still be fine.
you will have to purchase a memory card reader
they are inexpensive ,for example a usb memory sd reader goes for around 25.00
be sure it can read sd memory
the memory card is ejected next to the batteries.
http://www.dpinterface.com/reviews/canon-powershot-a430/canon-a430-side1.jpg

when you insert them in the reader it will read as another drive and you will see your pics.

Posted on May 07, 2008

SOURCE: B03 error code on kodak easyshare one 4mp digital camera

THe issue of the camera shutting down and the lens Extending is an internal malfunction. UNited Camera Repair has been able to fix this, at least for me, they did. They replaced the main board and the camera worked when I got it back. Otherwise, if you dont want to spend the money, its a gonner..

Posted on Jan 13, 2009

SOURCE: series or type of kodak C643 LCD

the C643 camera can have either type LCD screen. The only way to know for sure as far as I know is to disassemble camera and look. LCD screens are available on ebay for about 20 dollars. the thing to be careful of is make sure the selector knob is in off position when opening case up. there is a front and rear and the rear is the tricky one on account of usb cable port. be careful

Posted on Jun 07, 2010

Andrea Lock

• 6831 Answers

SOURCE: B03 error code on kodak easyshare one 4mp digital camera

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Nov 22, 2010