We are using an epson LX300+ for our qoutes and debtor and price lists and in has been giveng us a hard time it prints half of the task and stops with abip signaling a papper jam and error yet not of that is right iv tried refreshing it and switching it off and even cleaned it severaal times but yet the problem keeps we are unable to faction properly please help us as sooon as posoble or call us at 0516110174
An expert who has achieved level 2 by getting 100 points
MVP:
An expert that gotĀ 5 achievements.
Governor:
An expert whose answer gotĀ voted for 20 times.
Scholar:
An expert who has written 20 answers of more than 400 characters.
Expert
77 Answers
Re:
1: replace the ribbon
2: check the large silver shaft the runs through the carriage. Make sure your fingers can glide easily across it. If not, use a little alcohol e.g. to clean it. If it still happens, us a LITTLE sewing machine oil on your finger and lightly lubricate the shaft.
Not there, can't see the error. Let me know
Ed
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
either corrupt drivers, or bad print head. Try reinstalling the drivers for the printer. Otherwise, the problem will be more expensive to fix then to replace the printer.
I had the same problem when printing on Windows XP Pro or Vista Business OS while the prinout was fine using DOS or Linux environment. My problem was that every other line the fonts wiggle sidewards towards the right as if it were on italics.
To correct this, simply download the LX300-II ESC/P driver then update your printer driver by re-installing it using your device manager.
use the com1, and use a baud rate like 9600, with 8 and 1 bit stop. dont. be sure that is in ESC/P or IBM as you requiered. if your software use directly the serial port, be sure that the bios set up is properly. i think that the lx300+ have less buffer than lx300+2 and if you use high speed, could loose info.
Hi, you may want to reset/restore the Epson LX300 to default settings. This can be done by pressing down on the FONT button while powering on the printer. If done right the LX300 will print a test page with the firmware version.
It is also possible that the drivers are corrupted. In Start, Printers & Faxes, delete the LX300 printer, restart your PC and then re-install via Add Printer.
In some cases, defective parallel cable can also cause problems. Unfortunately the only sure way of checking is by replacing the printer/parallel cable with a known good/operation cable.
If the printer would really be requiring service, a Service Manual is available at (http://www.eserviceinfo.com/index.php?what=search2&searchstring=DPA-300)
Hope this be of some help to you. Good luck and pls post again how things turn up.
×