Question about Emerson LC320EM9 32 in. LCD HDTV

1 Answer

I don't know what channel to go to to be able to play my dvd player

I am trying to use my dvd player and I don't know what channel to put it on, for my dvd player or XBox, I have gone thru every channel.

Posted by charlottesan on

Ad

1 Answer

francoise cleofas

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Emerson Master
  • 2,432 Answers

Where did you hooked up the connector wire coming from the dvd player, in the component input or at the RF jack of the tuner of the tv?. if you plug at the component input of the tv you will select AV1 or AV2 etc. in the settings. but if you hooked up into the RF jack you can select channel 3 in the tv but at this time you need to have manual tuned in the tv to get the signal coming from the dvd player or xbox.

Posted on Oct 14, 2012

  • charlottesan
    charlottesan Oct 14, 2012

    I don't have the option for av1 or av2, I have PC, HDMI1, HDMI2 and Component???

  • francoise cleofas
    francoise cleofas Oct 14, 2012

    you don't have an rca input jack for audio/video at the tv unit?

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hi have just bought a panasonic blu ray player model dmp-bd77 here in australia we have put in a b/ray dvd from the usa that plays perfectly but when we have put in another american dvd(not blu ray a...


Every blu ray or dvd player sold in the world comes as standard unlocked to play any disc from any region. On the fifth play of a disc the DVD or Bluray will become locked to that region. So if you play 5 USA dvd's on the player after the fifth disc has been played only US dvd's will be recognised by the player, Same applies to BLUrays. So if i were you i would be careful about what discs you are putting in the player. Otherwise you will be left with a bluray player that cannot be used in Australia. After that happens the only way to play other region discs would be to get the player unlocked. Another point to add , a blueray player has two lasers one to play bluray and another to play DVD's. Lasers can fail so you could be able to play DVD's but not Bluray or vice versa depending on which laser has failed.

Aug 02, 2017 | Panasonic 2012 Dmp-bd77 All Region Code...

1 Answer

I don't know how to download cd's and dvd's on dell EL-1210-09


What do you mean download cd's and dvd's? You don't download them, you simply put them in the drive and play them. If you purchased a music cd or a movie dvd that you want to play or watch, then just put it in the drive. The system will recognize it and automatically open Windows Media Player for you to play it or you can open it yourself if autoplay is not active.

Exactly what is it that you are trying to do?

If you are talking about putting a blank cd or dvd into the drive to copy music or a movie to it, that's another story and will take a while to explain. You will basically need to make sure your CD/DvD drive can burn CD's or Dvd's. Then you will need some type of burning software (later versions of Window Media Player will burn).

Click Start/My Computer and look at your devices. if your DvD/CD Drive is listed look for RW which means rewritable (it can burn or copy). If it say DVDrw it can read and write dvd's. If it says CDrw it can read and write cd's. You can also look on the drive door on the computer where you would place the cd or dvd. If it says Rewritable CDrw (it can write cd's) or DvDrw (it can write dvd's). If it says ROM (read only media), that means it can Read Only and not write.

If the drive is rewritable then the software such as Media Player will allow you to go find what you want to put on the cd or dvd. You have two ways of putting things in the software to burn or write. You can copy and paste, or you can drag and drop.

May 13, 2012 | eMachines EL1210-09 PC Desktop

1 Answer

2 symptoms; don't know if they're related or not. For some time now, when trying to watch a movie on my small screen Coby Portable DVD player, it will play just fine for about half the movie, then...


I'm sorry that the DVD player is not playing discs are expected. Based on the information you have provided, it appears that the Lens head of the DVD player is dirty. I suggest that you use a lens cleaning disc to clean the lens head and it should resolve the issue.

Thanks for understanding.
Please let me know if the issue persists.

Nov 14, 2011 | Coby Televison & Video

1 Answer

How do you use the VHS function on the Toshiba DVR670 player?


Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with VCR/DVD DVD mode Press DVD on the remote control. Verify that the DVD indicator is lit VCR mode Press VCR on the remote control.(Verify that the VCR indicator is lit OR I set up this pdf link...click on it and it will show you all necessary steps http://www.helpowl.com/manuals/toshiba-dvr670-owners-manual-english-70453af.pdf

Oct 20, 2011 | Toshiba DVR670 Player

1 Answer

My RCA XL100 is hooked up to cable and works perfectly fine. We've had it for ages and the picture is clear, sound is beautiful, and it gets along fine with my universal remote. There's just one...


Some of their very old sets the video input was located on channels in the 90's; Try scrolling down from 99 to 90 to see if you locate the video input; this is just the way they did things in the older sets.

Before you rate this solution let me know what you find first.

SD TECH

Jul 08, 2011 | RCA Televison & Video

1 Answer

I have an old Philips Amplifier which I bought 18 years ago. The Amp actually can handle 5 speakers but I only connect 2 speakers (L & R). When I play certain DVD, although the background music sounds...


If you identified the specific products involved we (and you) might be able to look at the documentation and verify the obvious answer. Voice is generally concentrated on the center channel, so, yes, a speaker there would be a good idea.

If you don't have a multi-channel rig you shouldn't feed multichannel audio to it. Maybe use the unidentified DVD player's analog output and make sure it's set to mix the channels down to stereo.

Jul 01, 2011 | Philips Audio Players & Recorders

1 Answer

I can't get the dvd player on the tv. I don't know


I've reviewed your post, evey2011, and would be glad to assist you with this! The DVD should plug directly into the TV. When you plug the cable into the TV, there should be some type of designation for the ports, such as AV, Video, or Component. What you should do is look for the designation of the ports. If you can't make it out, put a DVD disc in the player and have it playing, then use the TV remote to cycle through the inputs on the TV to find the picture input.

Hope that helps and let me know if you have any further questions!

May 25, 2011 | Televison & Video

2 Answers

When I try to use my dvd player I put a disc in it says loading them it comes up and says bad disc, it will also do this if there is no disc inserted into it, can you help me? I don't know the model #...


Hi,

how long have you been using this player? I suspect the laser (lens) of the player. I think the laser (lens) is weak that's why it cannot read data/files on DVD discs.

To confirm if actually its a laser problem, insert an Audio CD into the player and see if will play. If it plays, then obviously, your laser (lens) is weak. But if it doesn't play Audio CD, then it might still be the laser (lens) or a mechanism problem.

Get a lens cleaner, use it to clean the lens. If that doesn't solve the problem, get a screw driver, open the player's cover so that you can gain access to the lens, use a cotton board to clean the surface of the lens. This should clean dust or dirt that might be on the lens.

If non of the above solves the problem, then know that you need to replace the laser to a brand new one.

To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a professional touch, so if you cannot replace the laser, get it to a repairman to fix it for you.

Once this us done, your player will play all DVD discs again.

Yours sincerely.

Elect_Comp.

May 15, 2011 | Koss KS4110 DVD Player

2 Answers

How do you get DVD picture to show up? Power is


You DO NOT use "Channels" to View a DVD player it usually connected to the AV External input. via AV, Yellow, (Video) Red & White, (Audio) or Component Video, Blue, Red & Green. (Video) + Red & White (Audio). These are selected via the External Inputs.

Feb 18, 2010 | Zenith ZDA311 DVD Player

Not finding what you are looking for?
Emerson LC320EM9 32 in. LCD HDTV Logo

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...