Kenwood VR-4090 Receiver Logo

Related Topics:

Question about Kenwood VR-4090 Receiver

1 Answer

WONT TURN ON

I HAVE A VR-4090 THAT MY LITTLE BROTHER JUST GAVE ME. HE THOUGHT IT WORKED, BUT WHEN I PUSH THE POWER BUTTON, IT JUST CLICKS LIKE IT IS TRYING TO TURN ON, BUT THE LIGHT DOESNT BLINK AND EITHER DOES THE SCREEN ON THE UNIT. I ASSUME IT HAS SOMETHING TO DO WITH THE POWER, AND AM SEMI KNOWLEDGEABLE ABOUT SOFTWARE ELECTRONICS, BUT THIS HARDWARE ISSUE HAS ME STUMPED. THANKS FOR THE HELP. DANNY

Posted by DANNY ray on

  • Anonymous Dec 29, 2007

    I have a similar problem in that the standby light is on when the receiver is plugged in, but when the power button is pressed, the unit clicks and the standby light remains on. Any ideas?

    Thanks,

    Doug Dunlap

    [email protected]

×

1 Answer

Anonymous

OUTPUTS SHORTED

Posted on Aug 22, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
5answers

I need a channel access code for a Westinghouse model VR5535Z

try this...

Contact westinghouse Channel Access Service by:
web: www.westinghousedigital.com/support;
select Channel Access and enter Access info.
Text Message: Text Tuner to 95495
Phone:1-800-701-0680 follow instructions
0helpful
1answer

MY PRINTER WILL NOT RECOGNISE ANY SUBSTITUTE CARTIDGES -

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

If this not reset it I put a program on my website for you to download run this program and it will gave you many choices to set your inks and so on.
Click this link to download.

Click Here = http://www.4all2sell.com/canon-tools/MPTool.exe

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
0helpful
1answer

Wont turn on CANON PIXMA MP 160

Hi there
This is only a try it may work.

  • Turn off the canon printer


  • Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.


  • Hold the Power Button, release the Resume Button.


  • Not releasing the Power Button, double click “Resume” and release Both Buttons.


  • Click “Resume” for Four times


  • Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
  • Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    0helpful
    1answer

    Reciever wont stay powered on

    I fear that there's no easy fix. Sounds like the power supply or the board which controls it is bad. If you're not an electronics repair person, it'll need to go to a repair shop.
    0helpful
    1answer

    GE 32GT740 wont turn on

    odds are high volt  circuit gave up. 100 150 repair 5yrs not worth repair.
    0helpful
    1answer

    Ignition problem

    I just got a VR 2000 Enduro but it wont start. It wont even turn when I click the starter button... no sound at all. I jumped it and rode it fine but it wont start on its own. I thought it might be the battery so I got a new one... still nothing. Any idea what the problem could be? Someone told me water gets into the front plug on this model when it rains... would this prevent it from even making a sound when I push the button? Please let me know what you think. Could be the starting switch is corroded or broken. Could be the starter solenoid. Or it could be the starter itself. Maybe a blown fuse. You really need a manual. It'll pay for itself real fast. ,
    0helpful
    1answer

    Setting my remote for universal

    I used to have that very reciever, and If I recall correctly, the remote that comes with it (the little blue and black one) can't control other components. Only the bigger remote (that came with the VR-4070 and VR-4090) can be programmed. I will do a little more research later to find out for sure, though (I actually still have my remote for that thing!!).
    0helpful
    2answers

    SVA TV

    Was it working befor you got it off your friend???
    Not finding what you are looking for?

    239 views

    Ask a Question

    Usually answered in minutes!

    Top Kenwood Audio Players & Recorders Experts

     Grubhead
    Grubhead

    Level 3 Expert

    5754 Answers

    John
    John

    Level 2 Expert

    510 Answers

    Steve Nordquist
    Steve Nordquist

    Level 3 Expert

    982 Answers

    Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...