Nothing's happening! Just beeping intermittently...
When I put my headset on, I'm not getting the little "powering up" scaling tone, just nothing and it's not working. So I tapped the button and all I get is a strange, intermittent beep and still nothing. It's showing as charged. D'you guys think it needs a new battery or something? Should I just throw it out the window in a rage?
Sorry about the wording - technically challenged...:(
Re: Nothing's happening! Just beeping intermittently...
No let it sit for a few hours and then place it into the charger overnight this should re condition the battery. Then try to repair the headset with your phone. Be sure to set up a trusted pair thus alleviating the disconnecting of the pair.
Any further questions email me or repost.
(E) [email protected]
Have a Great Day !!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 3 beeps is an error code. If not in your Dell manual contact their customer service tech department to find out what the beeps refer to and then you be guided accordingly with your repair. Could be a bad peripheral, faulty power supply signal, etc.
I'm having the same problem with the RS140. Only a few weeks old, and no sound at all coming out (not even the beeps). Have replaced batteries and tried a different audio source. Base station lights are on and indicating it is receiving an audio signal, but nothing is going go the headphones.
Remote ring detection provides a low tone * triple beep in your
wireless headset when you receive an incoming call. This feature
requires a handset lifter accessory, such as the Plantronics HL1 or HL10. If you do have a handset lifter but do not hear the remote ring detection, please check the following:
Check the placement of the lifter. - Make sure the handset lifter positioned directly over the phone's speaker.
Try adjusting the phone's ringer volume. If the phone's ringer is too
quiet, it may not trigger the ring detection built into the lifter. Try
turning up the ringer volume of your phone.
ring tone of the phone. - If your phone's ring tone provides short
beeps or plays music, the lifter's microphone may not detect it. Try
switching your ring tone to a traditional ring or long beep.
Does the phone have different rings? - For example internal calls vs
external calls vs transferred calls. Does the phone ring the same for
each type of these calls. If so try changing so all calls use the same
Attach the optional "external ring detector"
cable. This cable plugs into the lifter and provides a small, black
microphone. It is included in the plastic bag of lifter accessories.
Mount the microphone near your telephone's speaker. Click here for more
There are 2 versions of the Lifter accessory
- HL10 and HL1. The HL1 is a larger older version of the liter with a
more sensitive rind detector. Some phones will require the older
version of the lifter.
Please view the On Line Compatibility Guide to see if the older version (HL1) will be required for your phone.
*Please note the volume of notification beep in the headset cannot be altered, it will always be a low tone triple beep .