Question about Alpine IVA-D300 Car DVD Player

Loading error When I insert any cd or dvd it says loading error,but the radio works what is the problem,and how can I fix it

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.
Contributor
1 Answer

My IVA d300e lense is not working i need new lence i am in pakistan but unable to purchase
Can anybody tell me from where i can purchase i am ready to pay shipping charges as well

Posted on Jul 09, 2011

Anonymous

It could be a dirty cd or dvd or your lens is on the way out try and ripe the cd or dvd first and then try it and if it doesnt work then try clean the lens and if that doesnt work and that what that could b

Posted on Nov 18, 2007

abdul ali

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Dvd error disic after playing ten min, the pitcher crash

Posted on Sep 01, 2007

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Yeah, the same error message pops up after I had to use some tweezers to take out a cd with a sticker label on it. I found when inserting the cd, after the error message pops up, power the unit down and back up, the disk player might read it like mine does. I hope this fixes your problem unitl a tech can look at it.

Posted on Feb 03, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

DVD NOT RECEIVING DVD DISCS

Hello
The loading mechanism has the trouble. The inserted CD or DVD does not engage into the laser assembly unit properly. It may be due some fault with its loading motor or loading belt. Check these.

Read full answer

Mar 02, 2012 • Jamo DMR 60 DVD Player/Receiver

1helpful

1answer

Keeps rejecting any cd inserted spittinf it out

Hello
The CDs you inseting is not loading properly into the mechanism. Check its loading belt. If loading belt is loose, thie tyep of fault will occur. Check the loading motor also. If the pulling power of loading motor go less, the discs will not load properly and will ejected out as it loaded into. There is no other possiblilities other than this to check. OK.

Read full answer

May 10, 2011 • Cambridge Soundworks CD-740 Clock Radio

0helpful

1answer

99 Jeep Grand Cherokee. Radio and tape player works fine. Inserted 10-cd magazine and can hear cd's loading, but no light display on radio when cd button pushed. Is this fixable?

yes but why fix a 12 year old player ? something else will just go wrong after that heck cd players are cheap today and fit right in that opening

Read full answer

Mar 11, 2011 • 1999 Jeep Grand Cherokee

0helpful

1answer

Loading error when loading a cd need help fixing it.

The guides for ejection and loading have most likely failed. If under warranty still, it should cover the problem.

Read full answer

Feb 28, 2011 • Alpine IVA-D100 6.5" Wide LCD w/DVD/CD/MP3...

1helpful

1answer

I got a Jensen VM9020TS Car DVD Player ,i have a problem with it , why i can't play dvd when i inserted it is said loading but nothing happen?

Please try to put in an ordinary audio CD track and see if this is detected. If yes the optical is working, if not there is no laser scanning and the possibility of the head being faulty is high.
Now certain cleaner disks are not read and so will not be tracked.Try to open and do a cleaning manually of the laser head eye with a cotton bud very softly and without any pressing of the lens eye.
make sure that the Cd is loading into the drive and sets into the head if not the loading mechanism has some errors and must be reset for proper loading into the slot. possible obstruction or dirt accumulation must be checked.

Read full answer

Dec 10, 2010 • Jensen VM9020TS Car DVD Player

4helpful

2answers

I put in a cd and receive and E-00 error code. Is

Hi pcrouthamel, you may have a solution to this, but again you may not.

I have an '04 Ody and also had the E-00 error code when trying to play a CD. There are many suggestions as to what it may be and speculations as to how to fix it. The vehicle manual indicates it's a 'focus' issue.

Here is what I did based on internet research and recommendations and what occured:

1) checked both fuse #9 and #11 (pulled cleaned contacts and re-inserted) -- no fix
2) changed the battery in the Ody (is was due anyway) to address the possible low voltage issue -- no fix
3) inserted a CD, and before it was enter all the way, pulled it back out -- no fix
4) same as 3, but after pulling the CD out, gave the upper portion of the CD player a few firm bangs (literally - crazy I know) -- no fix
5) pulled the dash off (way easier than you may think) and removed the radio; pulled the top plate off to see if there were any obstructions within the unit such as coins or other material; shook it to ensure there weren't things I couldn't see; used a Q-Tip and worked it over the lense to clean it; tried another CD - no fix
6) in addition to 5, just as I inserted the CD for a second time, and while it was fully loading, I gave the heat conductor plate on the back of the radio several firm hits with the heel of my palm -- it worked!!

Apparently, there is more to the 'focus' issue than the vehicle manual leads you to ascertain. Like many DVD and CD players, the laser runs on a carriage. Sometimes this carriage can become misaligned; perhaps from hitting a pot hole too hard. My movement of the carriage while the CD was loading, had put it back in alignment. Now my CD player works.

Hope this helps.

Read full answer

Dec 05, 2009 • 2003 Honda Odyssey

6helpful

3answers

Eurovox 'Maestro Series' 10 stacker displaying 'E-99'

CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.

FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds.

IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

Read full answer

Jun 21, 2009 • iLO CA3000V CD Player

0helpful

1answer

After loading, disc error is displayed when dvd is inserted

hello i have had the same problem this maybe because of the region that your dvd is made to play.different dvd players play different.region dvd the regions should be on the dvd and the dvd cover.

Read full answer

Apr 25, 2009 • Televison & Video

0helpful

1answer

Optiical error in car CD recorder

if you have children they may of placed change into the cd loading slot.

if not your optical laser lense is prob dirty.

go buy a cd laser pickup cleaner from best buy or radio shack. its a cd with fine hairs that clean the cd laser lense.

and do yourself a favor next time stop loading dirty cd's into you cd player.

Read full answer

Apr 10, 2009 • 2007 GMC Yukon Denali

1helpful

1answer

Loading error ???

Look for a microprocessor reset button, it will be very small. press it with a pen or pencil. If you cannot locate this then pull the radio out and disconnect the wiring harness for a couple of minuites then plug it back in.

Read full answer

Jan 01, 2007 • JVC KD-AVX1 Car DVD Player