I came across a Logitech secure connect mini receiver what is this do? what is it for?

If all the keys on the keyboard have stopped functioning follow the instructions below to reconnect the keyboard.

This problem is likely to be a lost connection. The connection between the mouse and the USB mini-receiver or the keyboard and the USB mini-receiver can be lost due to several reasons such as:

• Low batteries
• Moving the USB mini-receiver from one USB port to another
• Moving the USB mini-receiver to another computer
• Plugging the USB mini-receiver into a USB hub or other unsupported device such as a KVM switch (your USB mini-receiver must be plugged directly into your computer)
• Using your cordless mouse/keyboard on metal surfaces
• Radio frequency (RF) interference of more powerful wireless devices such as:
  • Wireless speakers
  • Computer power supplies
  • Monitors
  • Cellular telephones
  • Garage door openers

Eliminate any problem sources mentioned above that might be affecting your devices.

Follow the procedures below to reconnect your mouse and keyboard.

1. Make sure the USB mini-receiver is directly and securely plugged into a working USB port on your computer.
   
2. Make sure the mouse is turned on. The on/off indicator on the bottom of the mouse should be green. If the on/off indicator is not illuminated, press and hold the red connect button on the bottom of the mouse until the on/off indicator is green.
   On / Off Indicator
   
   
3. Press and release the red connect button on the underside of the USB mini-receiver. This will broadcast a signal to your mouse. This broadcast will last only a few seconds, so you must perform the next step quickly.
   
   Red Connect Button
   
4. Quickly press the red connect button on the bottom of the mouse for 1 second, then release it. The power indicator will flash briefly and then turn green. The mouse is now connected to the receiver.
   
   Red Connect Button NOTE: Holding down the red button on the mouse for more than 2 seconds may cause your mouse to turn off instead of connecting. If this occurs, start again at step number 2.
   
5. Move your mouse to see if the cursor moves. If the cursor follows the mouse movements, your mouse is now connected.
   
6. Press and release the red connect button on the underside of the USB mini-receiver. This will broadcast a signal to your keyboard. This broadcast will last only a few seconds, so you must perform the next step quickly.
   
   Red Connect Button
   
7. Quickly press and release the red connect button on the underside of the keyboard.
   Keyboard Connect Button
   
8. You will hear a short beep. The keyboard is now connected to the receiver.
   
9. Test your keyboard to see if it is working. If the mouse now works but the keyboard still does not, see Knowledge Base article 9144.
   

hello sir

try checking with a different system like your friends.

I reinstalled the software twice. Then it worked again.

Regards

Thomas

Hello,

Here is a link to the page on Logitech.com to order the receiver, it runs $10.00 plus shipping.


http://tinyurl.com/y9q82xc

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

try the store u have bought the wireless mouse and ask them if they sell receiver only....if not it looks u have to get a new complete set

Logitech does provide the replacement part for your USB mini-receiver, check the following website (availability 2009Oct23): Click Here

YBC (/\)

Hi how case Rule question is very easy, you can just copy the image through a mouse and send the picture across the adhesive in skype ( Copy and paste the picture )

Contact Logitech

try disabling all other wireless products,
remove setpoint and run on native drivers