Will my photo frame read SDHC cards - PANDIGITAL PAN 70-0 7.0" LCD Digital Picture Frame With Remote

Some picture display frames will only handle files below a certain size and of certain types. Check your manual for the gigaware to see what those restrictions are. It may be that you will have to reduce the resolution or size of the photos or make sure they are all jpeg.

Some frames are not able to use an SDHC card. You might double check the requirements from the manufacturer... or even easier, try a card that is just a plain-jane sd card.

Hope this helps!

The problem is that your Digital Picture Frame is only compatible with SD cards, not SDHC cards. You bought a larger card for your Digital Picture Frame, not noticing that it was SDHC (or not knowing that it mattered). The new card doesn't work, not because it or the Digital Picture Frame is broken, but because it's not compatible.

Cards up to 2Gb are generally SD.
Cards of 4Gb are generally SDHC.
Cards over 8Gb have to be SDHC.

(There are exceptions. Sometimes, manufacturers make 4Gb SDHC cards but some have errors; they disable half of the chip and sell it as 2Gb, but it's still SDHC. 4Gb cards are almost always SDHC because they're cheaper, but 4Gb SD cards do exist. They are so rare that I've even seen a guru on this site claim they don't. I did own one once, but it was very expensive and turned out to be so unreliable that I had to return it. I don't recommend looking for one, because of the problems.)

Your solution is to go find a 2Gb card, and be extra sure that it doesn't say "SDHC" on it.

Your 4GB card is actually an SDHC card, not an SD card. While SDHC cards will fit into SD slots, they are electronically incompatible and will not work. You need to use an SD (or MMC or xD or MS), 2GB and smaller.

Is the card an SDHC card (4GB or larger)? If so, the printer's SD reader may have been designed before the SDHC format came out, and thus may not be able to read the card. Not a big problem in that portable USB SDHC card readers are being cranked out from China in the millions these days, and are extremely inexpensive ($3 or less shipping included, no fooling). These will work with your card. Just plug the card in, then plug the reader into an available USB port on your computer. Here' are some options from Amazon.

In general, photo transfer software doesn't care what kind of card you have, as long as the card reader can read the card. One thing to check for if you want to use SDHC cards: make sure the card reader can read SDHC cards as well as SD cards.

Only your manual can tell you that. Find out what card is compatible AND make sure you format it first using your digital photo frame settings software. You manual will tell you how to do that.
Always works better that way.

What SD card do you have exactly? If its a SDHC this could be the reason for it not reading the pictures. Hope This helps!!

Make sure the memory card is not UDMA if a compact flash memory card or SDHC if an SD memory card. Neither of those are going to be compatible. You will need smaller cards like 1gb SD or CF variety.

Does not support sdhc