Remote Difficulty I purchased this set used. I am able to access the MENU by pushing that button, which pops up at the Picture-in-Picture option. I am unable to use the touch-sensitive arrow keys to move within the menu. Additionally, if I select the Picture-in-Picture sub-menu, I am still unable to cursor up or down in it. I have programed a Comcast universal remote to control the TV, but have not found any way that it can access or affect the MENU routine.

To reverse the picture on your SEIKI SE32HY10 TV, you can try the following steps:

1. Press the "Menu" button on your TV remote to access the main menu.
2. Use the arrow buttons on your remote to navigate to the "Picture" or "Display" menu.
3. Look for an option called "Picture Orientation," "Mirror," or "Flip Horizontal/Vertical."
4. Use the arrow buttons to select the option and press "Enter" or "OK" on your remote.
5. Check to see if the picture has been reversed. If not, try selecting a different option if available.

If you are unable to find the "Picture Orientation," "Mirror," or "Flip Horizontal/Vertical" option in the Picture or Display menu, it's possible that your TV may not have this feature. In this case, you may need to contact SEIKI customer support for further assistance.

If you are trying to set up WiFi on your TV using a Magnavox universal remote control, you may need to use the remote's navigation buttons to access the TV's settings menu. These buttons are typically labeled "Up," "Down," "Left," and "Right," and they are used to navigate through the TV's on-screen menus. To use them, follow these steps:

1. Press the "Menu" or "Settings" button on the remote to access the TV's settings menu.
2. Use the "Up," "Down," "Left," and "Right" buttons to navigate through the menu options.
3. Select the "Network" or "WiFi" option and follow the on-screen instructions to set up your WiFi connection.

If you are unable to access the TV's settings menu using the remote's navigation buttons, you may need to refer to the user manual for your TV or universal remote for more detailed instructions. Alternatively, you may need to contact Magnavox or the manufacturer of your TV for assistance.

1. Turn on your TV.2. Press the Home button on your remote control to access the main menu.3. Use the arrow keys on your remote to navigate to the Settings icon.4. Press the Enter button to open the Settings menu.5. Use the arrow keys to navigate to the Picture Settings option.6. Press the Enter button to open the Picture Settings menu.7. Use the arrow keys to navigate to the Picture Mode option.8. Press the Enter button to open the Picture Mode menu.9. Use the arrow keys to select the picture mode that you want to use.10. Press the Enter button to save your selection and exit the menu.

If you can access the Menu options with your present universal remote, get into it, and surf thorugh picture adjustment and PIP adjustment screen, and set the PIP option to OFF. If you can't access the Menu option with your present remote control, there is no other way to do this without its original remote control.

Go in the tv menu,right at bat u in the Picture mode go down the menu to reset push it.The Tuner board will reset it self.It will be set on the Dynantic fixed mode.And the AV mode button on the remote should able to changes back and fourth again Dynamic fix mode,Dynamic mode,Standard mode,User mode,Game mode.Not able to changes by pushing the remote button AV mode to changes,than ur Tuner board have problems,not working properly.

Hi there. The actual button option that you will need to use for this adjustment will be the aspect button and, unfortunately, this button is only on the remote and not on the TV itself. If there is a control panel located on one of the sides of this set, you may be able to push the menu button here and navigate your way threw the menus screen to the aspect option. I suspect you will need the remote.

please rate and God bless..

there should be an input button on the remote. click it and a list of options like video 1, component 1/2 ect should pop up. your cable is on one of these options. try clicking on each of these options one at a time until your picture shows up. make sure you are using the TV remote.

Push the volume button on the television set (not the remote) up once.

Then press the menu button (TV, not remote) for about 12 seconds.

It should flash once and go to dynamic mode (center, bottom of the screen), which will indicate that it is now in the "non-store-demo" mode, allowing you to save your picture settings, and access the menus.

on some sets you can push both the channel up and down buttons to access the menu, then use them and the volume buttons to navigate the menu. otherwise you may have to get a programmable remote control.

Can you access the menu on the front of the tv? Is so go into the menu setup and switch from cable to air then run the autoprogram to search your channels. If you cannot access the menu on the front of the tv then a remote will be required . Also if if your tv has audio/video jacks in the back of the set and you are not using them hook it up with those inputs for a better picture . Your have to push the input button to select that a/v input you used . Good luck