Blinking red warning light

download the driver from the dell website for your printer onto your computer

Ensure that the printer power cable is firmly connected to the printer and the electrical outlet
Determine if the printer has been held or paused

1. In Windows XP, click Start® Settings® Printers and Faxes.

In Windows 2000, click Start® Settings® Printers.

1. Double-click Dell Photo AIO Printer 922, and then click Printer.
2. Make sure a check mark is not next to Pause Printing. If a check mark is next to Pause Printing, click Pause Printing to deselect it.

Check for flashing lights on the printer.
Ensure you installed the ink cartridges correctly and removed the sticker and tape from each cartridge

Make sure you loaded the paper correctly

Myprinter won"t print it says it is the Dell photo aio printer 922 is not working . how can i get it to work. thank you

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

try unplugging it and then plugging it back in if that don't work then reinstall fromm scratch

Try to unplug the power cable as well as the USB cable of your printer for few minutes. Then plug it back in, check the lights again.

check to see if the ink cartridges are installed properly, or if there is a paper jam. If not unplug it for 2-3 minutes, and try using it again.

Remove the right ink cartridge (color). You will get an error saying the cartridge is empty, but ignore that. Hit cancel on your printer. Print your job...when your print screen comes up, under preferences check the box for print colors in black and white. Your printer should print just fine without the color cartridge. Ignore the flashing red light.

Lots of luck. I couldn't even get the printer to load the software or install the hardware. I was helped by Dell's tech support (Dell has one of the best tech support programs that exists, in my opinion) for at least 4 hours without any good results. They sent me a replacement for a replacement and I finally got the printer and the software to show by installing it differently. Now it will not print, and, like you, the light to the power button blinks all the time and the printer states that there is no color cartridge installed, even though I have re-installed the new trial cartridge sent by Dell several times. I am going to purchase a new Canon Printer.

driver problem reinsatll software drivers