Uniden Cordless Phone Logo

Related Topics:

Steffi James Posted on May 01, 2007

GE - 25951EE1

I all of the sudden cannot get a dial tone. What have I done? MawMaw07

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Aug 11, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Aug 11, 2008
Answers
1
Questions
0
Helped
135
Points
1

Instructions say to set either tone or pulse, how do you do that? i have no dial tone after hooking it up?

A

Anonymous

If it is on an additional phone base (not the main), put the phone back on the main base for less than a minute.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a GE model #29893GE1-B it is connected and plugged in, but no dial tone

Remove all the phones on the system. Remove all the handset batteries. Plug in one old style corded phone to the main phone jack, it is normally the one closest to the front door. Do you have dial tone? If not, it is your Telco. If you have a dial tone, plug all the other phones in testing for a dial tone as you go.
0helpful
1answer

GE portable phone model # 26928GE1-D No dial tone-installed new battery still no tone

That isn't a whole lot to work with. Get a working phone and take the cord out of the base of the GE and plug it into the working phone.
If the working phone gets a dial tone, look into the modular receptical on the GE base and see if the contact wires aren't out of place.
If you don't get a dial tone on the working phone, try changing the connection cord between the phone and the wall. Also look for the same problem in the wall receptical as discribed above for the GE base.
0helpful
1answer

Phone won't work

our phones were working fine. now after an eight hour electrical shut down, no dial tone.
0helpful
1answer

No dial tone

no dial tone on my cordless
0helpful
1answer

GE cordless model 26928GE2-A

Dial tone is OK, but can't dial out
• Make sure the tone/pulse setting is programmed
correctly.
TONE/PULSE DIALING
1. Make sure the phone is OFF (not in TALK mode).
2. Use the CID/VOL left (-) or right (+) arrow button to
scroll to 1TONE or 2PULSE, or use the touch tone
pad on the handset to enter the desired setting. For
example, to choose TONE dialing, press the number 1
key. 1TONE is the default setting.
3. Press flash/program to store selection. You will hear a
confirmation tone.
0helpful
2answers

Radio shack phone c-4210

for my phone I hold down the flash key then the menu comes up and you can press * for tone or # for pulse. Hope it helps!
3helpful
1answer

Cordless telephone sw/from pulse to tone

In General Electric (GE):

TONE/PULSE DIALING
To set to tone or pulse dialing:
1. Press and hold the program button for two seconds. You will hear a beep.
2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing.
3. Press the program button again. You will hear a confirmation tone.
6helpful
4answers

Ge 900 MHz cordless phone set on rotary dialing

Lisa, If the 900MHZ phone is Model 26928M programming for rotary dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. Press the program button again. You will hear a confirmation tone.
Not finding what you are looking for?

145 views

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8093 Answers

Cindy Wells

Level 3 Expert

6690 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...