Lens hood broken off and I need replace ment part to screw it bac

Look for lens repair shops online.

http://www.ebay.co.uk/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.H0&_nkw=+Panasonic+DVX+100+camera+mains+power+adaptor&_sacat=0&_from=R40 i hope this helps you .

Remember in UK we are on Pal not NTSC ok?

hello!
send a mail to me and i'll send the schematic
[email protected]

Screen? Had the same problem. It's an internal flex wire connecting LCD with camcorder. Got from the repair shop did it by miself and it's like knew. It's very common in sony. Good luck

most likely problem is dirty video heads. try a Panasonic cleaning tape; if that doesn't work, hand cleaning by a technician should work.

You probably have the lens cap on, the iris dial closed, or you are in vcr mode rather than camera mode. You may also have the nd filter set to 1/64th, this is only for bright sunlight. When shooting indoors with low light, set the nd filter to off and hit the iris button until iris manual appears on the lcd, then dial the iris dial in front of the iris button up or down to bring the iris to around 5.6 f stop.

Hi!
The DVC7 has a 43mm filter thread on its lens. Depending on your Bower's thread size, you may need a step-up or step-down adapter ring to fit it to the DVC. 
After checking if you have your sizes correct, you need to remove the DVC7's lens hood. After that, it's just a matter of screwing the wide angle lens to the DVC's lens.
Hope this helps!

You can open the cassette cover and spray inside the upper left side of mechanism(closer to the back) with contact cleaner spray,because there is a rec inhibit switch.If it's not damaged and just dirty you solve your problem ,but if is damaged it needs replacement.

My Panasonic ag dvd100be modal , auto off t-reel lock earr please solve my problem sir.