Hoptpoint Aquarius front load washer dryer wd640p

Is the door fully closed or has some debris got into the mechanism.is the child lick on?try resetting the machine by switching off power at socket, then whilst holding the start button for five seconds whilst you switch it back on at socket.door solenoid should cluck once and the key sign should disappear.hope this is of help.

You will need to replace the entire control panel assembly to cure this problem

it is located at the back of the machine...are you encountering problems with this machine? check this link i will give you, this a forum/comments which the owners encountered different problems with this machine..

http://www.unbeatable.co.uk/p_rupr/Hotpoint-Aquarius-WD420-Front-Load-All-in-One-Washer--Dryer-Reviews/22394331.html

press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Unplug the machine from the wall for 5 minutes, then plug it back in and try it again. If the lights come back, the control board needs to be replaced.

turn the machine on while preesing the on and start buttons together until dOFF appears.

hotpoint aquaris washer/dryer, press and hold cancle and start untill all lights come on,then press and hold on/off and cancle /start untill doff appears then the test mode has been reset

You need to hold the start button infor at least 3 seconds, then change programme to pump out. once that programme has finished change the programme to what you want.

Put belt on motor pully first then turn big pully around!Like fitting bike chain.

you can only select half load if you wm has a half load button or switch found on the cosol panel