Camera will not read memory card

Look at your memory card. SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Make sure you're using an SD card, 2GB or smaller. This camera will not work with higher-capacity SDHC cards.

Format the card using a card reader on computer and select file system as FAT

there is switch inside card slot its damage show it to services centre or contact me

if shoot black photos and videos, don't work shutter (repair lens unit).

You MUST FIRST format ANY memory card that you plan on using with this camera. Otherwise we can't guarantee that they will work. Also, Casio has only tested 3 brands of memory cards and can say for sure that they will work with their cameras.....those brands are Toshiba, Panasonic and Sandisc. If it is neither of the above I would recommend getting a different card and making sure that you format it WITH THE CAMERA BEFORE USING. :)

Same problem. My camera is 3 weeks old. I dropped it at a short distance onto a wooden floor and it immediately said my memory card was locked. I took the memory card out, it was not locked. I tried 4 different cards and they all say the same thing. If I take the memory card out, the camera runs fine on internal memory, but only holds about 8 pics. I've tried everything. Please help!!

Make sure it's a Sandisc, Toshiba, or Panasonic memory card. No bigger than 2 MB unless you have done a firmware upgrade. Try formatting memory card and if that doesn't work then you will have to get a different memory card.

Don't know if that works for you.
I just use another memory card.
I have 1 card my P505 doesn't work with.
Others are fine.
Hope this helps.

Rosi

Make sure that the SD card you are using is either a SanDisc, Toshiba, or Panasonic. Those are the only cards that have been tested with Casio cameras. Also make sure that you format the card WITH THE CAMERA before you try and use it the first time. If it still doesn't work I would try resetting the camera and then you should have no problem.