My friend just gifted me an Epson Powerlite S1. It had no lamp so I ordered a new one from Epson. I replaced the lamp and checked, it was working partially fine as on RGB cable it was all red tint display and on video rc cable (driect from DVD) it was working fine. In three days I transported it back home and there when it turned it on, lamp light is on with no display signal from projector, just blank lamp light. Pleas advice ! Thanks and regards Tauseef Baig
I figured it out. open it up, and make sure the ribbon cables are securely plugged in.
What color is it projecting when you turn it on without any source(devices) attach to it?
632 views
Usually answered in minutes!
i have the same problem.
I have the same problem. The lamp is on but there is only white light coming out -- no blue screen & projector display like usual. I tried changing the bulb but it didn't work.
Worked fine for a long time. Now, even when I switched cables etc. it only shows a lite. I cannot get them Menu to work or any other display.
Any ideas?
i also had this problem so i called epson they told me to take out and reseat the bulb i did then i turn it back on now no light emits from the lens and i have blinking red light
×