Unable to locate led display to purchase for this camera
SOURCE: using self timer on my digital camera
1 In any Still mode, tap Settings to open the Settings
panel.
2 Tap Self-Timer/Burst repeatedly, until the desired
Self-timer icon appears at the bottom of the LCD:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, auto-shutter release on a
tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
SOURCE: kodak v1073 lens cover won't open when camera is
Remove the batteries and clean the battery contacts inside the camera
with a soft cloth (a heavy buildup on the contacts may require cleaning
with a fine wire brush, steel wool, or sandpaper). Remove any residue
that the cleaning leaves in the camera, and then reinstall the
batteries. This clears most power-on problems, but if yours persists,
check the Kodak troubleshooting guide at:
http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198
SOURCE: problems with kodak v1073 focusing
E-mail your question to Kodak at:
http://www.kodak.com/global/en/service/contactKodak/email/consumerDigital_contact.jhtml?pq-path=13452
SOURCE: no sound on video with Kodak v1073 dig. camera
Uninstall the quictime player from your OS then obtain a new copy. www.apple.com
SOURCE: My USB cord is connected to my Kodak V1073 camera
After you plug it in you have to turn the camera on. Then open the easyshare software and go to "add pictures". But the camera must be powered on for the computer to see it.
54 views
Usually answered in minutes!
×