- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try this. Re-wire your 12v power source to remain in a constant "hot" state. ie: connected to battery instead of ignition acc. Then, when you want to turn units on or off, use the remote or buttons on headrests themselves. This method will leave power to the units when switched off so the internal memory can resume where you left off.
I work for Coby technical support. Our customer service phone number is 1-800-727-3592.
there is no way to increase the output of the Coby dvd player within the player itself. It may be that the player isn't outputting very well through the audio coaxial output which i presume your using. If this is the case, there is no fix for that type of issue. You would want to replace the player.
you feel this solution doesn't deserve a good rating, please let me
know why so that I may better assist you. If there is anything more I
can do to help, I will!
Try 3308. That is what is shown in the oweners manual I received with my Qwestar 360MVP. If that doesn't work, go to DEFAULTS and select RESET. This should give you the factory initial settings then try 3308 again. Good luck!!