- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have selected a wonderful watch... Heuer and TAG/Heuer should be gently wound by the motion of the human wrist and the falling of a centrally pivoting weight (there is no ideal direction).
AUTO-WIND function is NOT at all unique to your watch...
After a couple of CHEAPER "winders" failed me... and after I figured about 4 watches was more than enough to keep wound... I found the greatest BASIC watch winder... to run year over year (efficiently and quietly)
MTE watch winder (their very basic WTS-4).
Good luck: I WILL try to include the URL (see page 6)
When you wind it manually (forward or clockwise) it winds the mainspring. Only need to watch it 5 or 6 times if it's completely stopped you wearing it will do the rest. If you going to get a automatic winder get one that will wind in both directions. It will give a few revolutions clockwise and then we'll go reverse counterclockwise.
Hope this answers your questions thank you.
There are four modes for our Executive Collection of Watch Winders (TM and SM series):
Mode 1 (both switches with the O pressed in): rotates for 180 seconds on then 12 minutes off.
Mode 2 (first switch with the O pressed in, second switch with the I pressed in): rotates 180 second on then 15 minutes off.
Mode 3 (first switch with the I pressed in, second switch with the O pressed in): rotates 180 seconds on then 18 minutes off, then 180 seconds in the opposite direction.
Mode 4 (both switches with the I pressed in): rotates 180 seconds on then 24 minutes off.
For switching winding direction:
I pressed in will wind clockwise
II pressed in will wind counter clockwise
Neither pressed in will turn the winder off
*Please note that the CW and CCW settings do not apply when the winder is set to Mode 3 as this mode winds in both directions.
the crown/ winder has three positions
unwind the crown nad pull out slightly is for winding the watch.
position two pull out slightly more it should adjust the date .
and then finally position three fully pulled pout will adjust the time.
If it does not do this then is possibly the winder pivots broken/faulty.
The watch should last 36 hours from fully wound. If your wearing the watch and using a watch winder and its still stopping, you have a problem with the mechanism. Get it serviced. (its probably just a clean and oil req'd)