Question about Kyocera FS-1135MFP w/ Document Feeder
check in back side of printer and laos down the cartridge.
pull the cartridge and check gain there is may be paper jam.
also try to rese toner cartridge.
Posted on Oct 21, 2008
If even a very small piece of paper is in the paper path it could cause this issue. You may need to have a technician take the printer apart to see what the cause is. If you can indicate exactly where inside it may be causing the paper to crease it would indicate whether one of the rollers is causing the issue or not, you may have a roller that is needing to be replaced. If you haven't had your printer looked at by a technician in a while it may be time to get a maintenance cleaning done which would resolve your issue and also indicate if there is any major problems going on with your printer.
Posted on May 28, 2010
Try the feed tires in the tray first. More than likely the paper is not being picked up and causing jam message. The separation roller also has a hub on it to prevent a second sheet from feeding. Sometimes these start to lock up ,a little oil on the hub sometimes relieves some of the tension.
Posted on Jul 07, 2010
SOURCE: my kyocera FS-C5015N printer is
Reclean the cyan corona wire/grid with the cleaning block that comes with each toner.ensure that you leave the corona unit as far out of the machine as possible for 30 seconds to allow the grid to dry.If this does not work then you will need a technician to attend to the printer.
Posted on Aug 10, 2010
Tips for a great answer:
Aug 01, 2018 | Kyocera Office Equipment & Supplies
Sep 21, 2016 | Copystar Kyocera FS-1135 MFP/DP...
Sep 06, 2014 | Copystar Kyocera FS-1135 MFP/DP Printer
Jun 15, 2014 | Kyocera FS Office Equipment & Supplies
May 28, 2014 | Copystar Kyocera FS-1135 MFP/DP...
Apr 02, 2014 | Copystar Kyocera Fs-1135 Mfp Multifunction...
Sep 22, 2013 | Office Equipment & Supplies
Sep 02, 2013 | Kyocera Office Equipment & Supplies
Mar 05, 2013 | Copystar Kyocera FS-1135 MFP/DP...
Jan 05, 2009 | HP LaserJet M3027 MFP Printer
1,031 people viewed this question
Usually answered in minutes!