Zenith IQC50H95W 50" Rear Projection Television Logo

Related Topics:

Question about Zenith IQC50H95W 50" Rear Projection Television

1 Answer

Rear projection has sound no picture

I have a Zenith 50 in & I lost the picture but still has sound had it fixed 2 times both times lasted @ 1 year same problem same fix any ideas

Posted by Ronald Vasconcellos on

  • 2 more comments 
  • mames Dec 21, 2007

    I have the same problem with my T.V. Then i tried to turn off the tv and turn it back on but it would not come, no power at all. I continued to mess with it and unplugged it and plugged it back in and then it just came on without even putting the power button on. Then it would not have a picture but would have sound then the whole tv would turn off on its own within a couple of minutes? Does anyone have this problem or know how to fix it?

  • Anonymous Jul 31, 2008

    i have sound and no picture



  • Anonymous Sep 04, 2008

    50 in rear projection sound no picture

  • Anonymous Nov 16, 2008

    mine has sound no picture when i took it apart it apears to have 3 small picture tubes 1 for each color. I didn;t see just a bulb to be replaced. i'm guessing its just too old and not worth fixing. i'm thinking about buying a flat screen lcd after thanksgiving.

×

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 76 Answers

Impossible to tell with just this information,have seen bulb cause no picture with these,usually if you remove it is easy to check as will have broken glass as the lamp pops.

Posted on May 14, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Zenith 50 in RPTV Hourglass

tried to re seat the connectors in the convergence circuit, if can not get get with reset check if their is a burnt resistor near the convergence ic.
1helpful
1answer

Lost picture

When was the last time u replaced the projection bulb,yes it could be that simple the projection bulb it dead.The bulb last only about 1 or 2 years,by using the tv on about 4 or 5 hours a day.
4helpful
1answer

When trying to turn on my tv, the green light blinks a few times then the red light blinks a couple of times then automaticaly the tv shuts off. There is no picture at all. It makes a couple of sounds like...

sounds like the projection bulb went bad. change the bulb and it should work. sometimes they make a high pitch noise when they are trying to turn on. the bulbs seem to last about 2 years for me.
0helpful
1answer

Big arc in picture

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - TV makes a chirping sound.
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull
0helpful
1answer

The sound is perfect but no picture although occassionally when switching on the picture appears for a second or so. again on occasion a amall glow will appear centre bottom of screen

Call Zenith Exchange Moduel 1-800-632-6637,Replace the power suppy board the one that has FBT flyback transfomer on it ,It will have Board number on it.I have used this company in the Past they are a good company when it comes to replacing board then to try and fix it yourself.
1helpful
1answer

Blurry picture on left side double image right side is ok....

Ur convergence is dead,need convergence kit.
U know how to solder right?Tries these websites for convergence kit.Tv Repair World.com,Shopjimmy.com,Ebay.com or Partstore.com
0helpful
1answer

Zenith 50 In Rear Projection Hour Glass

My picture is a double image and has a sideways hourglass on the screen. Please help me!
0helpful
1answer

Hi please help me

ok! you have lost contact or crack board find the lost contact then re soldered it! do not hit em anymore because can cause damage other big parts! like flyback! H out! and more!
0helpful
1answer

No sound

very simple 1 check spekar &its connection for loose contact 2 sound section supply. 3 parts near ic might be defective near sound section.
0helpful
1answer

No picture

the porblem of your tv might be somwhere in the video chroma.... the first thing to do is to check for an open capacitor 16V 1000mf path ways to CRT board connection to the main board... if your not inclined with this job contact for a service technician.....gud luck!!
Not finding what you are looking for?

236 views

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

 Grubhead
Grubhead

Level 3 Expert

5754 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...