Canon iP6000D - reads "No paper"

Your printer might be out of paper.. so try this..... press Black/Color button... if it doesn't work turn off your printer and press paper feeder on the back side and press the power button with holding the paper feeder. Don release it until the process of printer is complete... thanks

try to look for the cassette it is located in the lower portion of the printer you can pull it to load paper

Error 5200 is print head temperature rise,you need to change the print head.The part number is QY6-0050.If a have been useful please give me a vote :)

To fix the paper feed problem, Clean / rub each roller with a damp cloth with a dab of detergent.
Check for paper residue , especially near the paper empty flag,
Then reset the printer:
First power off the printer. Next, while holding STOP/RESET button, power on the printer.
While holding POWER button, release STOP/RESET button. Then push STOP/RESET button twice.
Wait about 20-30 second until the LED shows "0?. Then push STOP/RESET button four times.
Finally push POWER button twice. Last step is to turn off the printer by pressing the POWER button one last time.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Download some free software, the "GIMP" (Graphic Image Manipulation Program) from http://www.GIMP.org and use it to "flip" your image.

Hello sir; On the paper exit unit there have a paper exit senser got to be stuck or out of track. loose it or put it back in right position.

hi,
use good quality paper for printing. clean the feed roller or get the printer serviced from the authorized dealer.
thanks

hi, clean the feed roller or get it cleaned from an authorized service center. use good quality paper

thanks

You do know that you can use 4 x 6 photo paper in the paper feed? or else you have to tuck it into that little try under the printing outlet and be sure to click the change of feed button on the upper right of the console.

Try Closing and opening the paper output tray then press resume button on the printer while the printer is powered on,check the paper feeder ensure that there is nothing jamming up,if this doesn't work then let a canon technician have a look at it, the problem is minor.Hope you succeed