Question about Chase-Durer Chase Durer Pilot Commander Alarm Chronograph

Open Question

Chase-Durer Pilot Commander Wrist Watch

Zeroing out the stop watches after a new battery is installed so they are facing up towards 12:00 o'clock the way they should?

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

valvestem

  • 623 Answers

SOURCE: i have a problem with my chase durer combat

In all probability the watch has become magnetized, which affects the mainspring hence it's timekeeping capabilites. Now you need to find a watchmaker/shop that knows what this means, and has a demagnetizer (yes, they do make such a thing) and have it demagnetized. It should be relatively inexpensive, say $10-15.

Posted on Sep 29, 2009

Ad

Anonymous

  • 51 Answers

SOURCE: the watch just quit working. I had the battery

go back to whoever replaced battery first ask them to check battery not faulty then if battery ok ask them did they AC the watch when fitting battery any repairer who knows what they are doing will know what you mean, if they dont find a decent repairer..other option have it serviced..

Posted on Mar 26, 2010

taran_2005

taran_2005

  • 10515 Answers

SOURCE: i live in melbourne my chase durer special forces

Hi,

Unfortunately, they do not have any dealers or support desk in Australia. I would never prefer these watches to be repaired by an authorized service center. You need to contact them at :-

http://www.chase-durer.com/navi/contact.html

They would tell you how you need to ship the watch and would also provide a quote for the same.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

Jia heng lighter watch parts and configuration of components?

Oct 02, 2016 | Watches

1 Answer

How it works invicta clock mechanism ?
Your watch is battery powered or a 'quartz' watch. It is commonly refered to as a 'chronograph'. That is another word for stop watch.As well as telling time and the date, your watch can time how long an event lasts. For example, a horse race. You start the chronograph or stop watch when the horse starts and stop it when it crosses the finish line. When the next horse starts you need set it back to zero to time the next race.Operation is simple. The upper push button starts and stops the chronograph. Try it. Now with the chronograph stopped, push the bottom button. The hand return to the 12 o'clock position or the 'zero' position. Also notice the small dials on the dial or face of the watch. They record minutes and other increments of time. The large hand going around when you push the upper button is recording seconds. Hope this helps, Michael

Oct 09, 2012 | Invicta Lupah Collection Chronograph #9813...

1 Answer

I can't get the chrono dial to stop spinning and I know it will drain the battery, how do I turn it off
push the button at 2 o'clock.

Dec 25, 2011 | Michele Watches Michele Michele Tahitian...

1 Answer

Stop watch not zeroing
Pull out winder 1 step and us the push buttons to adjust hands to 12 o.clock . when you have done this pull winder right out and use push buttons to set other hands then push winder back in.

Jul 06, 2010 | Tag Heuer Aquaracer Quartz Chronograph...

1 Answer

I have a Expedition Metal Combo watch itme T411019J. Face and digital both stopped. Took to a clock repair shop to get battery. New battery in it and only the digital works. Clock repair tech thinks there...
If the watch is out of warranty, them speak to you local Timex service center (see "timex.com" for contact detals) and take advice from them.

Jul 01, 2010 | Timex Expedition 84601 Wristwatch

1 Answer

I have a Sunbeam Westminster Quartz mantle clock I bought approx 17 yrs ago and after replacing the battery and setting the time again the clock stops after an hour or two. Any ideas of what the problem...
mcdevito75 here, Even a so-called new battery doesn"t really mean it"s NEW!! NEW!! in other words your NEW! battery could have been laying in a store for months before you bought it. Thes ebatteries have a shelf life of a few months, about 1 year with use in a clock / watch.---- Try another battery, also the quartz mechanism could be starting to wear., also double check the battery is installed correctly.

Jun 23, 2010 | Watches

1 Answer

My watch has stopped working and the battery is fine
The battery may be bad or installed with the wrong side up. Usually the positive (+) side faces up.

If this is not the problem you may have a bad coil in the movement or the watch needs servicing by a qualified watchmaker.

If you have any further questions please let me know.
Many thanks!
Mike Kenley
TimeOut
Worldwide watch and clock services
If it don't tick I can fix

Jun 01, 2009 | Bulova Marine Star 96C30 watch

1 Answer

How can I start a small Quartz clock?
The first thing to try would be to test the battery. If the battery is good the problem may be the mechanical works need to be started in motion. If it has swinging parts try to get them swinging. If it has hands set the time on the clock. Hold the the clock in your hand with the face towards you and rotate it clockwise a few times to get the gears moving. Sometimes just letting it sit upright for a day or so will be enough to let the clock start working. I hope this is helpful to you.

Carol.

Apr 12, 2009 | Watches

1 Answer

Citizen skyhawk not zeroing
try this

Oct 31, 2017 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

Analog clock not in sync with digital clock
This problem may be due to your analog hands being improperly zeroed. To find out, try this: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero. If you do this and your minute hand points to 1 o'clock, or five minutes, you will know that this is the problem. If this is the problem, you can can correct it by zeroing the hands as follows: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero, or close to it. You should also notice the letters "HR" in the lefthand digital display. This allows you to move the hour hand by rotating the crown. If the hour hand is not pointing at 12 o'clock, rotate it so that it does. 3. Push the top button once. The letters "MIN" should appear in the lefthand digital display. This allows you to move the minute hand on the large dial, and the minute and hour hands on the small UTC dial. Rotate the crown so that the minute hand points directly to 12 o'clock. 4. Push the top button again. The letters "SEC" should appear in the lefthand digital display. Rotate the crown to point the second hand directly at 12 o'clock. 5. Push the crown back into its normal position. Set the digiatl time and date in your tie zone, and your analog hands should match the digital read-out. If the zeroing of the hands is not the problem, I don't know what is wrong with the watch.

Jan 22, 2007 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

Not finding what you are looking for?

View Most Popular

Chase Durer Pilot Commander Alarm Chronograph

  • Watches

Related Question

Jia heng lighter watch parts and configuration of components?

  • Watches

Open Questions:

0 Answers

battery replacement

Oct 19, 2013 | Chase-Durer Chase Durer Pilot Commander...

0 Answers

replacing the rotating bezel

Apr 01, 2013 | Chase-Durer Chase Durer Pilot Commander...

0 Answers

I have a Chase-Durer Pilot Commander XV and it is a few years old and does not tick. I cant find out what kind of battery it takes nor how to change it. Any help would be greatly appreciated.

Apr 05, 2011 | Chase-Durer Chase Durer Pilot Commander...

Related Topics

Chase-Durer Chase Durer Pilot Commander Alarm Chronograph Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1 Answer
The second hand stop moving but the watch is still

Chase-Durer Bomber Command...

1 Answer
Need to replace the watch battery.

Chase-Durer Blackhawk Mach 3...

1 Answer
How to set a Honora chronograph watch

Chase-Durer Typhon Chronograph...

2 Answers
Directions to replace the Blackhawk watch battery.

Chase-Durer Blackhawk Mach 3...

1 Answer
What kind of battery does a chase-durer wing commander x watch take?

Chase-Durer Wing Commander XVl...

Is It Time for a Smartwatch?
Is It Time for a Smartwatch?

View all Fixya Reports

Top Chase-Durer Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Are you a Chase-Durer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...