Question about Kyocera FS-C5030N Led Printer

Open Question

Kyocera fs-c5200 color registration - Kyocera FS-C5030N Led Printer

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 14 Answers

SOURCE: Kyocera FS-C5030N

could be a problem with the cyan ledhead as well

Posted on Sep 16, 2008

Ad
leroyal

Leroy Elliott

  • 2120 Answers

SOURCE: Kyocera Ecosys FS-3900DN in HP emulation mode

Right click on the printer icon and choose properties. Your emulations are listed there.

Posted on Jan 23, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: CLEANING A KYOCERA FS-2000D

Follow the page http://www.fixya.com/support/t1336338-kyocera_fs2000_thin_black_vertical_line

Basically, you remove the cartridge and developer all at once, then remove the waste toner bottle, then push the grey tab in to release the drum cartridge (be very, very careful in removing and putting back in. Any scratches on the drum and you will enjoy black spots permanently on printouts).

On the right side of the grey charger section is a tab you can use to release it. Do this, then put the drum away in a light tight back to prevent damage to it.

The reason why this Kyocera printer doesn't have the primary charger wire cleaner is because it did away with it. It now charges via a black fuzzy looking roller on top which is like the secondary corona charger wire, which then applies it to a roller, which then applies it to the drum. I think this is nice since it should prevent printer quality problems better since there is nowhere for oxidation to really collect. But, OTOH, it does happen anyhow.

I cleaned mine off and the streaks disappeared. I used a non amonia based cleaner to help, since I didn't find any dust on it to begin with. Whatever you choose, do not get your fingers on it, or it will put oil onto the rollers and that will make it worse.

Worked for me.

Posted on May 25, 2009

SOURCE: change drum kyocera fs-3900

open printer front cover and remove drum unite ,two side screw open two side spring **** two side open drum
if you are not possible it then buy a new one unite in your service authorized delar

Posted on Aug 27, 2009

Anonymous

  • 241 Answers

SOURCE: I have a kyocera FS-2000D with error code: Call fo...

Error code 0150 is an engine EEPROM communication error. The engine board might need to be replaced. I have heard that sometimes a defective developer unit could cause this same error code. I would try swaping a develper from a working FS-2000D first.

Posted on Jun 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kyocera Fs-c8020 MFP color printing problem


You need to run a calibration cycle to bring the laser scanners back into alignment. It may need to be done professionally.

Sep 19, 2018 | Kyocera Office Equipment & Supplies

1 Answer

2 colors of my kyocera fs-c2026 gradually are shifting more. 'Aligment' and 'registration' dont work. How to fix this?


there a service bulletins out for this issue. certain parts and supplies need to be replaced as they have been re-engineered. Firmware needs to be done as well to recognise the new DV unit designs. Need a factory tech to repair

Jan 11, 2016 | Kyocera Office Equipment & Supplies

1 Answer

How do i clear jam 20 in fs 3140


You can find it on page 375 of the user manual here: http://www.manualslib.com/manual/450403/Kyocera-Ecosys-Fs-3140mfp.html?page=375

just continue with page 376, 377, 378 to follow the instructions ...

Oct 17, 2014 | Kyocera "FS-3140MFP Printer, Copier, Fax &...

1 Answer

ERROR CODE F186 FOR KYOCERA FS-C5100DN


Guten Tag,

Kyocera FS-C5100 error code 186
was sagt der fehler aus

Aug 06, 2013 | Kyocera FS-C5100DN Color Laser Printer 23...

1 Answer

Wrinkling envelopes in FS-3900 Kyocera Printer.


try chaning the quality of the envelope, some do not respons well to heat.

Jun 23, 2009 | Kyocera FS-3900DN Laser Printer

1 Answer

FS-C5020N just put new toner in, color not print


your best bet with this one.. is to call kyocera support... they might give you a simple answer.. where as a tech will charge you an arm and a leg...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Apr 23, 2009 | Kyocera Mita FS-C5020N Led Printer

2 Answers

I have a Kyocera FS-C5030N, the alignment has gotten off on it, i can't print business cards they are way off now, and about every 10-15 pages i print the alignment is way off, it moves everything up, what...


check the paper size settings.if you are using custom paper sizes, you have to specify the sizes on the printer, otherwise it will think that it has a standard paper size

Feb 23, 2009 | Kyocera FS-C5030N Led Printer

1 Answer

Kyocera FS 1010 printer. Not printing even with new cartridge


may be moisture.just switch the dehumidifier on for some tine.

Jan 18, 2009 | Kyocera Mita FS-1020D Laser Printer

1 Answer

Skewed printing


Most probably you have to do the Color Registration Settings and the Color Calibration.
The Color Registration will fix the fuzzy printing and the Color Calibration the way how the colors looks. The Color Calibration it is done automatically after each batch of 40 or 80 pages and if you need you can do a manual Color Calibration BUT THE COLOR REGISTRATION must be done manually.

Go to Menu->Others->Service->Color Registration and print a test chart. Will print a page and you have to read the alignment of some lines Cyan Magenta Yellow Black with some numbers. Check the Advanced user guide for details. Basically you have to read the number / letters of each color where 2 lines are matching. Then you can enter those numbers into the printer for each color.

If the Cyan only is off then will be easy ...

Nov 03, 2008 | Kyocera FS-C5030N Led Printer

Not finding what you are looking for?
Kyocera FS-C5030N Led Printer Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...