Ovens Logo

Related Topics:

Dean Caruana Posted on Oct 03, 2012

Hi there, I have a belling gas oven cooker, which when you try to ignite the oven or grill it keeps ticking but wont spark up. The gas is fine as you can light them manually and the hobs light fine so guessing its something to do with the ignitor button, any ideas??

1 Answer

Robert Stacey

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

  • Contributor 12 Answers
  • Posted on Oct 03, 2012
Robert Stacey
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Joined: Jan 22, 2010
Answers
12
Questions
5
Helped
10801
Points
42

Why would they be trying to light an electric oven ( see which product do you think they mean ) You need to check that the spark being produced is close enough to the gas outlet

5 Related Answers

BADBOYJAY

Jason Harris

  • 274 Answers
  • Posted on Jan 07, 2008

SOURCE: oven does not work

its just your heater element you will need to wright down your model number and go on ebay or go to your local appliance shop they might order you 1 there about £35 pound

Ad

Anonymous

  • 1314 Answers
  • Posted on Mar 02, 2008

SOURCE: Roper gas oven won't work

replace the thermal coupling on the pilot make sure it is in the flame of the pilot it looks like a copper wire or tube if its bad it wont open the gas valve after the pilot heats it up

Anonymous

  • 16 Answers
  • Posted on Jun 01, 2009

SOURCE: Ignition switch on a gas hob/electric oven not sparking

Some have a AAA battery under the button - replace this, others use mains to create the spark, ensure you have the ignition wired up

ashburton

  • 417 Answers
  • Posted on Dec 22, 2009

SOURCE: belling oven stopped working

It is most likely the element needs replacing although it could be the oven thermostat.

I would try a new element first, it is not a complicated job to change the element but you need to switch the power off at the wall before you start work.

If you are unsure or in doubt about carrying out the work seek professional help.

Testimonial: "thanks ashburton i will attempt to change the element first."

Anonymous

  • 250 Answers
  • Posted on Oct 27, 2010

SOURCE: MY STOVES COOKER'S OVEN

The hob is normally totally independent of the oven. What is actually working or not working on the oven? i.e. does the grill still work, is the clock OK and can you set it, or is everything totally dead?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Just got a new Belling Sandringham Farmhouse range cooker [DF 100-cm]

turn power off to unit look at point were hard cable joins cooker uncover and check the bridges in the junction box are correct
0helpful
1answer

My belling wall oven model number 444440560 keeps going out after only a few seconds ignition how can I fix this thNks

which is going out top or bottom? may want to check the oven safety valve though it does not normally go out compared to other components. may have a bad igniter ( does it glow or lite up at all) it may still glow but not put out enough current to ignite flame? check with multimeter as well. if oven top is going out also check the igniter model or infinite switch
0helpful
1answer
0helpful
1answer

Diplomat adp 0511 grill has no gas or ignition

Gas ovens / stovetop that use gas and not electricity. These work by igniting gas and use actual flame on the the stovetop.

Newest cook top styles, such as the induction or halogen cook tops combine the same style to produce more even heating. Some of these ovens feature thermal limiters or thermostats that regulate the burner system.
I offer free advice bcuz God is so good!
GAS OVENS
The spark igniter tip is dirty (can clean it with either a little wire brush or a piece of fine sandpaper).
2) The Pilot flame is too low, and the tip of the igniter is not in the flame good enough. (the flame acts as a circuit when it touches the tip & completes the circuit).
3) The spark module is no good and needs to be replaced.(But 1 & 2 are your best bet).
spark module does not sense the flame when it's on. The spark igniter is also the flame sensor which provides feedback to the spark module.

Make sure the igniter is properly aligned with the burner lighting holes and it is clean. All lighting holes must be clean too. You can enlarge them using a drill bit one size bigger.

If it would not fix the problem, replace the bake burner and the igniter.
There is a small chance for the spark module itself to be bad as well.

The oven safety valve
(also called the gas valve) is the part that ensures that gas is not released until the igniter has reached the correct temperature needed to ignite the gas. While this part can fail, it is uncommon. If the hot surface igniter does not glow you should first verify that you have voltage to the circuit. This is a live voltage check and should be performed by a qualified person. If voltage is lost at the valve terminals then you should verify the continuity of the bi-metal in the valve using a multi-meter.
0helpful
1answer

Westinghouse oven LPG 527 wont stay alight and grill wont start

Normally the grill is completely separate to the oven. Press the ignitor before you turn on the grill, as, to ignite, oxygen needs to be present (ie: not flooded with gas) . and you should be able to see the spark from the ignitor in the grill. if you can't, then you may have problems with your ignition pack or ignition leads.
Feb 16, 2012 • Ovens
0helpful
1answer

Hi, I have a Belling gas cooker, the oven and grill are working fine but there is no gas coming through the rings at all. Could someone tell me what the problem could be and would it be expensive to fix? ...

I'm not a cooker expert, but try the following. Get a bit of electrical flex, strip the covering and part it so you have one fine strand. Poke this into the tiny hole in the centre of the jet underneath the ring and jiggle it about. The jets often get blocked by grease or a bit of dirt in the pipe same as the washers on a car. Costs nothing to try.
Jun 13, 2011 • Ovens
2helpful
1answer

Belling oven stopped working

It is most likely the element needs replacing although it could be the oven thermostat.

I would try a new element first, it is not a complicated job to change the element but you need to switch the power off at the wall before you start work.

If you are unsure or in doubt about carrying out the work seek professional help.
Dec 22, 2009 • Ovens
0helpful
1answer

I have had 3 engineers out to try and fix my stoves 720gra cooker and has changed all the printed circuit boards ,and all other parts but still the top oven and grill doesnt work and has now been classed...

check the voltage on the spark generator,should be 240dc or 110 ac.
or it could be the harness(wires fron spark generator to ignition) to check harness do a continuity test,an electricion will know,or get a electirc tester and do it with the instructions.
1helpful
1answer

Grill ignition is sparking when the oven is on

if the grill is constant sparking when the oven was on and turns off when the oven is not in use then u either have a defective pcb/ht lead or electrode if it is self lighting or if you have to push in a button then this button or control will have a problem
2helpful
1answer

No power in oven

If it has a digital or anologue timer, make sure it is set on manual, or the oven will not work.
Dec 05, 2008 • Ovens
Not finding what you are looking for?

618 views

Ask a Question

Usually answered in minutes!

Top Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6698 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...