Question about Sony FD Trinitron WEGA KV-32FS100 32" TV
When I turn on my tv the picture looks great but after 2 seconds, the picture fades and then a clank sounds hard, 2 seconds later the picture is ok and then the circle starts again and again. I checked all the cable and connection boxes even replaces some of them and they appear to be fine. I also tried the reprogramming option and now it will not change channels. I would really apreciate some help. Thanks.
Servis, thanks for the reply. I tried the dvd and other video options and work to perfection. There is something new I found out, if I watch the cable in PIP there is absolutely no problem, the problem is on the big screen. Another thing I cannot switch channels using the up and down keys, the only way is entering the digits. Well I guess I'll go purchase the materials to hook up my cable throught the video. Thanks a lot.
Posted on May 15, 2007
Hard to know what is wrong without seeing.If you own a dvd have you tried playing and is picture ok tru scart connector??.If it is then fault dosnt sound too bad,as all the processing cct is working except for the tuner section,.when you say there is a clank does the set trip out or what??.Have seen number of these with faulty micro panel which isint that expensive to repair.try the dvd and if pict still poor on this get est from sony service.If picture ok on dvd you could always tune in your cable tru video and use scart to connect instead of the tuner cct,.
Posted on May 13, 2007
Mmmm, sounds like the high voltage supply is toast. Recommend taking to repair shop; get an estimate, it may not be worth the money to repair.
Posted on May 12, 2007
Tips for a great answer:
Nov 27, 2010 | Sony KP-61HS30 TV
Nov 22, 2010 | Televison & Video
Oct 24, 2009 | Sharp Televison & Video
Sep 01, 2009 | Samsung LNT5265FX 52 in. LCD Television
Jun 09, 2009 | Televison & Video
May 12, 2009 | Sony Grand WEGA KF50WE610 50" Rear...
Mar 01, 2008 | Televison & Video
Nov 21, 2007 | Vizio P2 42 in. HD-Ready Plasma Television
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: