Hoover hw 130 m wiring schematic download - Hoover HW130M Front Load Washer / Dryer

We are Fixya, we aren't Hoover. You need to contact them direct or take it to a local Vacuum Cleaner repair shop.

There are parts schematics in this link. Parts 30 and 31.

https://www.google.com/search?q=hoover+uh30301+parts+schematic

..

That is brobably a bad wiring, that lose contact when you move the hoover forward. The wirings should be checked, here is some schematic:
Wiring Schematic :

Hi, the wiring diagram is at the back of the manual. This unit has the standard wire colors for all aftermarket head units. Please get back to me with the car model and year if you need to know the car wire colors to match up.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP390.PDF

Hi from retired Englishman in SW France,

Sorry but this forum does not supply any type of manual or schematic diagram direct; it's just made up of ordinary guys and gals, probably at home and from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)

You will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!

Good luck,
John C.

http://www.autozone.com/.../Windows-2001/Power_Window-Schematics.../_/P-0996643f80

you can download manual from hoover.co.uk

without seeing this it would be difficult to describe. I would take it to a vac shop and let him show you. there are no real schematics for the wiring of these units. I usually would cut off the cable with a few inches of insulation to know where to install the new one and reuse the old terminals if needed.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=825293
Generic problem for all Vacuums
Need schematic to replace detergent
Posted by blars on July 23, 2008
Need schematic to replace detergent distributor on Hoover FloorMate H3010
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can contact the Hoover Cust Serv website or phone # and they will be able to send you out a schematic on your Hoover FloorMate H3010. the website address and phone 3 are listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.

fixed it myself with help from UKWHITEGOODS web sight, excellent sight. No help from your sight whatsoever won't be using you again.