I have a JVC K-series TV (AV 21KT I think is the model number). For no apparent reason it stopped working two days ago. I have had this TV for about 5 years plus. When I switch it on, the picture appears for about 3 seconds (the interlacing is really bad)... then in the centre of the screen the text "X-ray" appears and the TV turns it'self off. Then the "Off timer" LED (located next to the power LED) flashes. the only way to turn it on again is to unplug the power and plug in again. What is this "X-ray" error given. What causes it. (does the CRT need to be degaussed or something) Can it be fixed. Please help! regards, Matt (South Africa)
Hi Everybody,
you can dummy the x-ray protection circuit by disconnecting the collector pin of a tiny transistor in horizontal circuit but if you want to get rid of the problem then you need to replace the Jungle IC # TB1226EN
Try this and for more information contact me on '[email protected]'
Posted on Oct 28, 2014
An expert who has achieved level 3 by getting 1000 points
HI Matt of south Africa Every Tv has an xray protection circuit.that circuit is faulty os you will have to take it to qualified tech to repair your tv.good luck.
Posted on Apr 26, 2007
I have the same problem with my TV. My JVC K-series has also this "X-RAY" thing that pops out when I turn it on. When I remove my TV's antenna, my TV did not turn off by itself. It was on for almost an hour. I thought it's already okay since it was able to stay for more than 3 seconds. But when I return the antenna, the X-RAY error appeared again.. It turned off automatically after a second or two.
×
I have a JVC K-series TV (AV 21KT I think is the model number). For no
apparent reason it stopped working two days ago. I have had this TV for
about 5 years plus. When I switch it on, the picture appears for about
3 seconds (the interlacing is really bad)... then in the centre of the
screen the text "X-ray" appears and the TV turns it'self off. Then the
"Off timer" LED (located next to the power LED) flashes. the only way
to turn it on again is to unplug the power and plug in again.
What is this "X-ray" error given. What causes it. (does the CRT need to be degaussed or something) Can it be fixed. Please help!
FRANCK I LIVE TO MADAGASCAR
Posted on Nov 04, 2008
430 views
Usually answered in minutes!
×