Hello, Please could someone help....i have an Acer Aspire T310 and it has been working absolutely fine until i got an UNMOUNTABLE_BOOT error on it last week, the computer would not start up windows, go into safe mode, nothing so i decided to reboot the whole system using my Acer recovery disks. Everything was going fine until it got to logging onto the desktop, the computer just sat at the windows xp screen and would not log onto the desktop, i left it for nearly a whole day and still nothing so i tried restarting it several times again and again it would reach the xp screen and just sit there. The last time i tried to restart it it made loads of high pitched beeping sounds the screen flashed no signal and would not switch on, the tower starts fine but the screen is black and there is no green light the light stays orange, this now happens everytime i try to switch my pc on. I checked the tower with another screen (which i know works with another desktop pc) and the same thing happens! I can't go into safe mode or try adjusting the video card settings or anything because the screen is just black!! If someone could help i'd be really grateful! Hope i gave enough info....thanx very much.
It may be a corrupt backup you are trying to install, but if there is a corrupt file you will need to borrow a genuine XP disc off a friend to repair it. You can use your own license number for the copy so your friend shouldnt be concerned with piracy. You may get the pc running by locating on the motherboard either the 3 pin JBAT1 terminal and put jumper from pins 1-2 to pins 2-3 then back to 1-2, or short both pins if you have a 'CLRCMOS', 'CLRRTC' or 'RTC' 2 pin terminals with a jumper cap. Restart pc and it should make you press F1 to set the cmos time and date and hopefully boot into windows, but if not the first paragraph will be the solution to the problem.
Posted on Apr 25, 2007
سلاموو..
يوجد لدي"acer T310" المشكلة الي فيه...نسيت الفلاش ديسك مشبوك فيه...ولمن أعدت تشغيله طلب مني أضغط على "F1" لحفظ التغيرات .... وأنا طبعاً فصلت الفلاش ديسك بدون ماأضغط ال"F1" وأعدت التشغيل.....هنا ظهرت المشكلة..لم تظهر الشاشة.
طبعاً حاولت أفصل الرام عشان أسمع إذا بيجيب صوت إنه الرام مش موجودة ....لكن ما جاب صوت نهائياً...
ومش قادر أحدث ال"BIOS" لأنه ما يدخل على ال"DOS" نهائياً...
فيا ريت من معاه حل لايبخل عليا ويرسل لي على البريد الموضوع تحت..لاننا صدق زعلان على خسارة الجهاز..
وشكراً على إهتمامكم بنا...أخوكم ....كمال حيدر
البريد هو/ [email protected]
ولكم جزيل الشكر والإمتنان
Posted on Nov 30, 2008
340 views
Usually answered in minutes!
screen just went black.indicates to;check signal cable.i checked the cable,same result.please help.
×