Question about Savv LM-S6001 Car Monitor

1 Answer

No picture my monitor doesnt work.all its got when i plug it into the dvd is a blue screen,sound works fine.the lead is fine that goes from the dvd to the screen ,i tryed it on a different screen.when its switched on its on av.i havent got a remote for it so im not sure if thats why its not working.do i need one to make it work.

Posted by paul allen on

  • paul allen Apr 24, 2007

    the dvd player is a sony dvd multichanger which is working fine on the rear screen in the car.have tryed a differant monitor in place of the savv one & it works fine,saying that i have to use the remote to make the picture come on.but the savv monitor as far as i know has only got 1 av channel.all ive got for connections is 2 power wires red & black,a white connector for the sound & a yellow which is of corse is for the picture.all them are pluged in.

×

Ad

1 Answer

Philip Rowney

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

A blue screen suggests no input signal, or a signal that the electronics in the screen can't handle. I don't think you need the remote, but, it may help. I suggest you try the dvd on a working monitor and check that it's a compatible output. The LM-S6001 is a multi-system monitor both NTSC(US) and PAL(Europe/Aisa). The monitor has a composite video (usually yellow) and RCA(phono) input and DIN, the manufacturer is unclear if both plugs are present. You can assume it's auto-switching, but that may not be the case. More information is needed to fully understand your problem. 1. make/model of DVD. 2. description of external plugs on monitor.

Posted on Apr 24, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a Samsung LED computer monitor (model S23A300B). The monitor connects to my Macbook air. The Samsung monitor recently stopped showing the picture on my laptop. Instead, red, green, blue and white...

Try the plugging the setup into a different monitor to eliminate the lead however it sounds like the monitors died. With cost of screens even if you can get hold of one you'll be better off getting a new monmitor.
0helpful
1answer

Connecting from laptop to tv wont work now. It was working fine previously

Check the display settings on your laptop to see if the external monitor output is disabled. There is usually a function key on the keyboard with a picture of a monitor on it which can be used to switch between internal & external monitors.
You may also need to try on another monitor/TV or change the HDMI lead.
0helpful
1answer

Macbook and 24" display flicker when plugged in

MiniDisplay will probabely not support the Cinema's screen resolution...
1helpful
1answer

On the DVD player the screen is blue and the sound works, but cannot get a picture. The remote will stop & start the sound, but still no picture. This unit is in a 2006 motorhome. On VHS side works...

suspect scart lead, check to see that it is firmly plugged in. Also, many dvd players have a bluescreen/screensaver function, check to make sure this ihasn't been enabled in the system set up menu.
0helpful
1answer

Blank Blue Screen

If you go to menu do you get that on the screen?
0helpful
1answer

Not enough av ports on t.v to connect dvd player and austar

may need to go to an DIY electronic store and get adaptore extenion boards
LG Support Search Results LG AU
0helpful
1answer

MY TV!!

try using AV im puts with dvd or vcr if this work your tuner is bad new cost aruond $90 to 120 if available but next year you wont have use for it
0helpful
2answers

Phillip PET710 Portable DVD Player

The back light of the monitor might be defective. or the drive signal might not be getting to the screen you will need a schematic, multimeter, and an oscilloscope to troubleshoot this issue. This is how you will have to go about this using the schematic locate the screen test points measure the voltages with the multimeter and look at the signals with the oscilloscope. this will lead to you finding the exact problem.
0helpful
1answer

Dvd/vcr combo,vcr is fine ,but dvd no picture,or sound,disc reads.

Hi There is an I/P button on your player's remote control. Power your player on then press the I/P button on your remote control.
Not finding what you are looking for?
Savv LM-S6001 Car Monitor Logo

Related Topics:

440 views

Ask a Question

Usually answered in minutes!

Top Savv Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1190 Answers

Brad Brown

Level 3 Expert

18893 Answers

Are you a Savv Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...