I can't seem to get the TVG to filter out the language.
SOURCE: TVG Help
If the movie dosen't have close captioning the tv guardian will not work. For the tv guardian to work there has to be close captioning.
SOURCE: The message "Start using your
Since pressing the setup buttons on the remote or the case doesn't work that means that you have a firmware or processor problem. I,m assuming that you unplugged the unit for at least a day and that didn't helped - in that case either start the unit while keeping the setup button pressed or, with the unit on, press both setup and menu buttons at the same time - all buttons on the case of course.
If this doesn't help then the unit is defective and must be sent to a repair shop for a new firmware update.
Setting TVGuardian®
Example:
To set "TV Mode Strict", "TVG CC On" and "TVG CC Ch
CC2"
1* Press [SETUP] in the stop mode.
The setup screen appears.
2* Press [ => ] to select "Parental".
3* Press [ENTER].
"Parental" screen appears.
4* Press [Down Arrow button] to select "TVG Mode".
Note:
If the parental lock is set, the highlighted box does not
move. You must enter the password to release the
parental lock first.
5* Press [ENTER].
The submenu ("Off", "Moderate" and "Strict") appears.
6* Press [p] to select TVG mode to OFF at this window, if it is selected strict.
OK.
191 views
Usually answered in minutes!
×