Cannot select "camera menu" from the Top Menu

Press the shooting mode button in shooting mode to display the shooting-mode
selection menu and set the shooting menu to Continuous.
Note:The maximum frame rate with continuous shooting may vary, depending upon the current image mode setting and the memory card used.

Select the "Color" submenu in the shooting mode menu, then select "B&W". Full details are in the "Shooting Menu" section of the Cybershot handbook (page 32 in my copy).

Set the shooting mode to a Creative Zone mode. Press MENU to enter the menu. Under the Setup tab, select [Live View function settings] then press SET. Select [Live View shoot] and press SET. Select [Enable] and press SET. Press MENU to exit the menu. Press SET. The image should now appear on the LCD instead of through the viewfinder.

Refer to "Live View Shooting," Chapter 5 in the manual for more details and the limitations of the LiveView mode.

Press MENU/OK to open the top menu. Select the shooting menu. Select FinePix Color. Take your pick of the color modes.

Press the shooting mode button in shooting mode to display the shooting mode selection menu and set the shooting mode to Auto (the green camera). Press MENU to display the shooting menu. Navigate to "Image Mode" if necessary and press OK. Take your pick of sizes here, then press OK to save the change and then MENU to exit the menu.

In the top menu, select MODE MENU -> CAMERA -> DRIVE -> [clock icon] then press OK. Press the shutter release button fully to start the timer.

It's in the section "Self-Timer Shooting" in the Reference Manual, page 152 in the edition available online at
http://www.olympusamerica.com/files/oima_cckb/C-3020Z_Reference_English.pdf

Press the shooting mode button in shooting mode to display the shooting mode menu and set the shooting menu to Auto mode (the green camera). Press MENU to display the shooting menu. Use the arrows to select "Image mode."

Set the shooting mode to a Creative Zone mode. Under the Setting tab, select [Live View function settings] and press SET. Select [Live View shoot] and press SET. Select [Enable] and press SET. Press the MENU button. Press SET.

To turn on the camera simply press the on/off button on the top of the camera.
to view information about when the photo was taken ect. press "disp" button, when your camera is in the display setting (blue triangle).

Some details first...

• The continous icon looks like multiple papers stacked on top of each other (in contrast the normal icon for single shot is a square box with an S in it so you can get it back to normal)
  
• The camera takes shots at 1.5 frames per second, or about three frames every two seconds for image size of 2272x1704.
• The shutter-release button has to be held down
• Continuous is not available in HI image quality
• Shooting will slow when memory buffer fills.
  

Setting to continuous...

• Put your camera in P, S, A, or M mode.
• I suggest P mode, this is for Program mode and does everything as Auto does, but allows you to override settings (except Aperture and Shutter).
• Press the Menu button
• Access the Continuous menu
• Select the Continuous menu option, again looks like layered papers.

Please rate as FixYa! ThankYa!