Washing Machines Logo

Related Topics:

Question about Kenmore Elite 20972

2 Answers

Water comes out the bottom of washer as fast as it goes in the top

I bought a used Kenmore Elite top-loading washing machine. When I connected it to the water source and turned it on, the water ran out onto the floor (apparently from the bottom of the machine) as quickly as it ran in the top. I have checked hose connections and all seem to be tight and the hoses are in good condition.

Posted by Hazel Hanson on

  • Anonymous Mar 30, 2014

    leak is coming from the top inside of washer in about the same area as the hoses connect on the outside of washer

×

Ad

2 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 878 Answers

Hazy, it's possible it's running out your pump. You need to pull the cabinet off to get a real look at where the leak is coming from. Check out the pics...and post back.

Posted on Apr 23, 2007

  • Anonymous Apr 23, 2007

    cabinet off

  • Anonymous Apr 23, 2007

    How to take the cabinet off

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My kenmore model #110.82261100 leaks from the bottom only when it is agitating and when it drains it stops. looked for a leak but the pump seems to be dry. any ideas

Posted on Mar 02, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kenmore elite 22952 keeps filling til overflows, no matter what level setting

Inside the case there is a water level switch. It is round, has 2 wires to a number of connectors and a tube that goes down to the drum. As the water goes in, the water level rises in the tube and causes the pressure to operate the switch and turn the water off. If the machine was tilted or laid flat with the transit bolts not being in place, it may have caused the pipe to come off. The usually look like this.
https://www.ifixit.com/Guide/Kenmore+110+Series+Washing+Machine+Water+Level+Sensor+Replacement/11037

or this

https://www.searspartsdirect.com/diy/repair-guide/how-to-replace-the-water-level-pressure-switch-on-a-direct-drive-top-load-washer

They are easy enough to change, but expensive. Check the pipe hasn't come off first.

https://www.google.com/search?q=kenmore+elite+22952+water+level+sensor+replace

..
0helpful
1answer

My kenmore elite washer model # 110.24082200 is leaking from bottom. No visible leak from back panel acces...

my kemore whasing machine model10010 .25864400is not drain all c los left sam wather in dram and sound of water pamp like cenot turne tenks Bruno
3helpful
1answer

Door won't lock on top loading kenmore elite oasis washing machine

1. Disconnect the electrical cord from the wall.
2. Move the washer forward about 12 inches.
3. Lift the lid and grasp the front of the washer top with both hands.
4. Place your knee on the front of the cabinet and pull the washer top forward and up.

The lid lock mechanism is secured to the bottom of the washer top with two screws. Remove those screws and the wiring will be exposed. Unplug the harness from the old mechanism and connect to the new one.

Secure the new mechanism to the washer top and let the top down.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
0helpful
1answer

Kenmore 300 washing machine warm water cycle is hot water

You have to check the thermostat connected to heater circuit.
0helpful
1answer

Water leaks under washing machine

SOUNDS LIKE YOU MIGHT HAVE A WORN OUT DRAIN PUMP, YOU WILL HAVE TO OPEN IT TO DO A VISUAL CHECK ON IT,
1helpful
1answer

Washer kenmore leaking water out bottom

Its very possible it could be one of the tubes that run to the fabric softener or detergent.
1helpful
1answer

Kenmore Elite Washer 110.24992300 spin problems

The pressure switch is mis-reporting the water level to the ECU.

Test/replace the pressure switch.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
0helpful
1answer

KENMORE ELITE HE 3- MODEL 44832200

is the washer full of water and is the sound like a fast clicking
0helpful
1answer

Kenmore elite top load about 3 years old

Check the boot for tears, also remove the lower axcess panel (Three torx screws or 7mm) and see where the water is coming from.
Not finding what you are looking for?

344 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Cindy Wells

Level 3 Expert

6448 Answers

tina gallow

Level 2 Expert

143 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...