An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: Camera shuts off after a few seconds
To find this information you will have to either go to the Panasonic customer support website and enter your Camcorder model number and check out the frequently asked questions to see if they have already asked this question and have a answer in the form. the website is (http://www.panasonic.com). you can call the customer support telephone number at 1-800-211-7262. Between the hours of 9am-7pm EST. You can also use the customer support e-mail at [email protected] Give them the Brand name and model number of the Camcorder. Explain to them that you are having problems with the Camcorder not staying power on. They will be able to help with troubleshooting the problem and getting it repaired.I Hope this information helps you with your camcorder problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can call the Panasonic customer support at this telephone number 1-800-211-7262. between the hour of 9am-7pm EST. Tell them that you need to buy some accessories for the palmcorder and ask them where you can purchase them. I hope this information help you with your problem.
When the camera's circuits detect condensation on the tape heads, this message is shown and the camera shuts down. This is to prevent damage to tapes, that could stick to the damp head.
It is recommended to leave the camera in a warm and dry place until sufficient time has elapsed for the condensation to evaporate. This may be several hours. Do not leave the camera anywhere too warm that is likely to damage it, like on a stove or radiator.
This issue is commonly caused by moving the camera from the cold outdoors, into the warmth of indoors.
If the symptoms persist, the head may be dirty. try a head cleaner cassette, or failing that, return for service.
These units are known for having bad "operation units", which consists of the switch that selects camera or vcr and the zoom unit. If you try quickly switching back and forth between cam and vcr and at least get a flash on the display, that is problem. Also, you can try slowly moving the switch (very slowly) between cam and vcr and awtaching to see if the power LED comes on at all. I have replaced many of the operation units on this unit.
It sounds like the battery is flat - I realise that you've probably already thought of this, and charged up the battery, however batteries have a finite life and number of charge cycles they can go through, and may appear to be fully charge (According to the charger, at any rate), but they are unable to hold any decent charge.
My suggestion would be to head down to the local camera shop, and ask if you can try a new battery in-store.