Remote doesn't work

REMOVE THE BATTERIES FROM YOUR REMOTE AND TRY USING THE CONTROLS ON THE TV

1 replace the old batteries use new ones alkalines with the same mark and polarities.
2) clean the contacts batteries with c. cleaner.
3) open the remote control, and clean the keypads from dirty, oxide, corrosion, with c. cleaner.
4 Proceed again, if the problem persist, you must go to the repair shop TV or replace by new ones.
God bless you

please go to download the instr.manual from www.fitness.manualsonline.com +code or www. remotecodelist.com or www.retrevo.com

God bless you

Hi! Transmitting doesn't mean it's working, What you should do to test it is use a good quality universal remote such as a Logitech Harmony and first program the preset code for your receiver into the Universal Remote. If that works, you know your OEM remote has gone bad, at least for those buttons. If it doesn't then you you should attempt to have your Universal Remote "learn" the IR signals from your receiver's remote If the controls still don't work, there is a problem with either your IR receiver on your receiver or the the circuitry that proceesses the signals into commands. Good Luck!

try these ones.

0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0177, 0185, 0280, 0623, 0624

those are the codes for Emerson Tv's

hope this helps

Cheers

Little Dish Fitter

I cant seem to program my RCA universal remote to my emerson tv

4 digit code is 0458

Try to call the phillips costumer service first!

http://support.rcaaccessories.com/index.html

http://www.remotecentral.com/features/r-rca.htm

Try using the information from these two websites. It may help.