Question about Tricity Bendix 18 in. DH090 Free-standing Dishwasher

2 Answers

Tricity bendix keeps turning off !!

Can someone please help? my dw keeps turning off, it will run ok for about 20 mins then turns off !! i tryed using an extension lead but it still happened, anyone got any ideas? thanks Lynne

Posted by lynne kneeb on

  • lynne kneeb Apr 24, 2007

    yes there is power to the machine, it completes the rince and hold cycle, but when i put it on any 'hot' wash cycle after about 15-20 mins it just turnes off, when i press the reset button on the extension cable it restarts the machine, but it only works for another 10 mins before it turns off again. when i open the machine it is very hot !! is there a thermostat? and can i change it if there is one?

    thanks and hope the description helps?

    Lynne

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a 24 inch bendix dishwasher, 3yrs old, Everything runs OK on all programs , except the water does not heat up.

Any Ideas

Thanks -- Howard

Posted on Jul 04, 2010

Ad

douglas smith

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Assuming you still have power to machine, it could be that the main circulating pump has a thermal overload in it which is tripping off. can you give me more detail?

Posted on Apr 24, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i fix a tricicty bendix dryer

You need to call a technician. If this unit is only 6 months old, it must be under some type of warranty.
0helpful
1answer

Tricity Bendix AW1400W Loud noise when spinning

The turning tube's belt or bearing may have problem.
If you know how to tighting the drive belt, you may try.
If not, maintenance or service persone should to call.
9helpful
1answer

Replace a belt on a Tricity Bendix TM 320 W Tumble Dryer

1. remove top plastic panel (retaining screws are at back)
2. locate metal brace (12 incles long and 1/2 inch wide) on top of the cabinet (in mine it is on right edge)
3. unscrew retaining small bolts (there is one a few inches below on the inside of the cabinet too).
4. Repeat for left side.
5. push the back and front halves of the cabinet away from each other
6. slide the new belt around the front of the drum
7. reassemble
8. if you need to tension the belt wrap 10-20 turns of insulation tape around the idler pulley

0helpful
1answer

Tricity bendix aw1001w door lock wiring...

If you have multimeter and can use / 1 wire = live feed 1 wire is switch, 3rd is a netural idea is door lock gets 240 volt live netural feed energises the lock which in turn switches feed over to other connection..look at interlock to get idea what wire goes where....
0helpful
2answers

Looking for Instruction Manual for Bendix Duomatic WD1054B

Could it be this, if not click "thks for trying" your prob will be back for someone else. If good pl rate me very nice!

http://www.fixya.com/support/t675105-help_whit_bendix_duomatic_wd1054b
0helpful
1answer

Tricity Bendix AW1001w

is the door locking if not replace it.
1helpful
2answers

Tricity bendix 4638

Try pressing several timer buttons together (hand and - on ours).
Not finding what you are looking for?
Tricity Bendix 18 in. DH090 Free-standing Dishwasher Logo

Related Topics:

416 views

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Dishwashers Experts

Brad Brown

Level 3 Expert

18733 Answers

Bill Boyd

Level 3 Expert

53816 Answers

'Victor Collazo
'Victor Collazo

Level 2 Expert

58 Answers

Are you a Tricity Bendix Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...