My printer is printing with a blank spot down the middle of all receipts. Everything is good on the outer edges just an inch strip down the middle of the receipt. I cannot figure out how to fix it. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a **** on the toner if you pull it out of the machine and you should be able to look down in there and see all across the roller in there, sometimes the sticker gets moved in the way or something and wont allow the laser to write all the way across that roller. Make sure there is nothing in that **** causing this issue and if its clear then make sure that you have pulled the strip out of the new toner... (easily forgotten) If this helps, Please mark as FixYa!! Get Paid
hi,check your printing setting and then print.
uninstall the printer then install the printer again then printer has default setting and print the paper.
sometimes printer current pages print wich is selected by setting.you must select all the pages.
to change the setting,,,
1-open control panel then open printers and faxes then check seeting.
I've seen this be due to dirty sensor or misconfigured media setting. Clean the sensor in the middle of the edge on the inside and outside of the printer, then if still having trouble - Inside the printer it should tell you that if you are having printing trouble:
turn off the printer
Hold down the feed button
turn on the printer and at the third red flash release the feed button
it will then feed some pages print some info and ask you to hit feed again to exit dump
hit feed again and it will say exiting dump
You have just made it reconfigure media, and it may know when to stop feeding now.