Engine runs great but pressure washer "EXH2425 by DEVAP" will not build any pressure. I took apart and freed up pistons but that did not fix it.
SOURCE: We think oil for the
To evacuated the oil from what I believe is the gas cap area, you are going to need some type of a siphon pump to remove the oil. A total engine tear down might be needed depending on where all the oil is. Remove the spark plug, and turn the engine over, if you are getting oil coming out the spark plug hole, then you are going to have to either tear down the engine, or leave the engine sitting in a way that you can drain all of the oil out of the system.If no oil comes out of the spark plug hole, then you should be good to go once you siphon out all the oil
1,061 views
Usually answered in minutes!
×