Question about Macmillan Burpee 3D Garden Designer Millenium Edition 3.0 (1575953269) for PC

1 Answer

Running program I installed the program but when I click on the Burpee 3D Garden Designer 3.0 it gives me this message "This program requires at least 3mb of free virtual memory to run. My computer is brand new , running windows XP and I have 1524mb virtual memory. What is wrong?

Posted by Roberta Clum on

  • Roberta Clum Apr 22, 2007

    Thank you so much for this information. I just couldn't understand why this program would not work as my computer is brand new.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Take a look at the comments on this product at Amazon.com. Despite what it may say on the box, no one with XP was able to get it to work. http://www.amazon.com/Burpee-Garden-Designer-Jewel-Case/dp/B00005B2PA This is an old program, and what's likely happening is you have TOO much virtual memory. What I mean by that is that the program was written so long ago they expect a maximum size of virtual memory. When your number exceeds that, in a computer program, frequently the number wraps around to zero and goes negative (internal to the program). This is likely the issue. Sorry, but the program is too old and unstable to run successfully on XP.

Posted on Apr 22, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Widow Designer and Door Designer on Architect 3D Ultimate dont work

have you contacted the website of this program and ask them
why is license has been revoked.
0helpful
1answer

, I want install Zebra LP 2824 in laptop HP DV6 Windows 7, 64 bit. But no funciona.when run an cartel say "this program requires that you install a designer printer driver. please click "add...

The Zebra 7.2 driver for Win 7 is last item in right column. Click on Zebra:


http://www.seagullscientific.com/aspx/thermal_95.aspx


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

2helpful
1answer

The 3-D embroidery system seems to be only compatible with downloading the designs to a floppy disk. I have a Husqvarna Designer I that has a USB port. Is there any way to download designs to an USB...

USB Designer 1s use Disk Manager, just like their floppy disk sisters, but it needs to be Disk Manager USB. New USB Des1s came with this program on a CD, and this software was also included free when a floppy disk Des1 was converted to USB. If you bought your D1 USB new, check the disks that came with it - one should be Disk Manager USB. If you purchased the machine second hand, contact the seller and ask for the program. It is a free standing program and you don't need a dongle. Check your 3D software - you might already have what you need. Open 3D, click down arrow for Accessories (far right-hand side) - what does your Disk Manager say? If it says Disk Manager USB you are okay to go.

I am not 100% sure of this, but I think that maybe the last update for 3D software (version 7.25) might have included Disk Manager USB. Go to the Husqvarna website and make sure your 3D is updated to the latest version.

If none of the above helps you, there is always the cheap cost embroidery software alternatives: Embird or Sew What. I believe they can write to Designer 1 USB sticks now.
1helpful
1answer

Get error message "stitch file too large for hoop". I have resized and still no luck putting it onto my card. I have the 3D program and recently downloaded files that should have been compatible.

You need to be sure to click the Centre button and Apply before saving. Also look at the design close-up and check for any stray stitches outside the sewing area for the hoop you want to use. Use the Edit tab in 3D Customising to remove these stitches, then re-save using the buttons as above. If that doesn't work, try saving the design in another format (.pes for instance), then bring it back into 3D Customising, click buttons as above and re-save as .vp3 or whatever you prefer.
2helpful
3answers

P!3DHome has stopped working

I encountered the same problem. In my case, the Punch! Landscape file saved into a folder on my C: drive called Program Files (x86). I dragged the entire folder for Punch! Landscape from the Program Files (x86) folder into the Program Files folder. I've had this same problem with games I've downloaded from MSN in the past, and this fix has always worked.
0helpful
1answer

Tells me I don't have quick time but won't install it. I installed the newest version from the net, but the program doest not seem to recognise it

You should check if there is a product update for your program, if not then contact their customer support. They'll probably have to provide you with a newer version.
0helpful
1answer

Drivers on internet

you can find the drivers on FUJITSU website
1helpful
1answer

Just tried to load the program, had it around for a while and it trys to install an old version of Quick Time and then stops. I have the most recent version of QT already installed. Any way I can get the...

if you get an option during setup for, express or custom installation, pick custom instead and uncheck the install quick time. otherwise just uninstall you current version of quicktime, install the program then update the quicktime
0helpful
1answer

I need to know how to download the program onto my laptop that has the Vista program.

if you right click the installation file and click properties then click compatibility then click run as windows xp it might install that way
0helpful
1answer
Not finding what you are looking for?
Macmillan Burpee 3D Garden Designer Millenium Edition 3.0 (1575953269) for PC Logo

Related Topics:

197 views

Ask a Question

Usually answered in minutes!

Top Macmillan Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18822 Answers

Cindy Wells

Level 3 Expert

6369 Answers

Are you a Macmillan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...