Olympus D-320L Digital Camera Logo

Related Topics:

Question about Olympus D-320L Digital Camera

1 Answer

Digital Camera The screen on my digital camera running with lots of lines through it like the old tv's. I can't seem to get it to keep a clear image of the view I have taken. This camera was a gift to me so it came without instructions, do you know where I might get some. Thanks!!!!

Posted by MeeMa listening on

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 247 Answers

$10 and a wait of a week will get you a pucca copy of the manual from http://www.olympusamerica.com/cpg_section/cpg_support_manuals.asp?id=657 This did surprise me a little, as manuals for Olympus models available over here (and yours appears not to be) are downloadable for free. You might try downloading a few manuals from http://www.olympus.co.jp/en/support/imsg/digicamera/download/manual/#d - just to see if any of them are close enough to help you out. A.

Posted on Apr 20, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Blue line

This usually happens when there is a defective CCD unit, This is the part that looks at the image and sends the signals to the cameras electronic systems. the unit has failed and will need to be replaced.
3helpful
1answer

No image in viewfinder

This is very common problem of ccd imager chip failure in Sony DSC-T1 camera and ccd imager chip will be replaced to get it fixed. This is not operational problem, it is hardware issue.
Local camera repair shop will do the job.
Thanks.

2helpful
1answer

Hi, I seem to have a problem with my Finepix Z1 digital camera. When I take a shot it seems to work ok, and the initial review image seems fine as well. But when I go back and review the image on the...

The clue is with the video.
The video function does not use the shutter. Lines on photo's or over exposure is due to the shutter not closing completely over the lens when you take a picture.
It will require cleaning which means opening up your camera and accessing the lens unit
0helpful
2answers

Screen shows no image for picture taking or playback

Is this Sony DSC-T1 camera or some other model? let me know to help you out.
1helpful
1answer

Camera wont function

If you can view old / stored picture clearly then it seems ccd imager defective in your Canon A75 camera. You will see noisy bars / pink shades. Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.
5helpful
1answer

Squigly lines run across screen cannot take pictures.

If its Canon A75 camera then its problem of defective ccd imager and Canon will repair your camera free of cost.
Click Canon CCD Imager Advisory for details.
1helpful
1answer

Screen image blurred and distorted.

Its bad ccd imager problem and ccd imager will replace in camera.
Sony will repair your DSC-T1 free of cost foe ccd imager fault.
Click Sony CCD Imager Support for details.

0helpful
1answer

Image is not clear after clicking the snap

This is a firmware proble.
If the camera is less than a year old it will be replaced
if more than a year a refurbished one may be offered as a discount.
Check out customer support at Fuji site.
0helpful
1answer

LCD SCREEN

LCD = Lousy Camera Device? Get used to using the optical viewfinder. The LCD is great for reviewing images after you've taken them, but it leaves a lot to be desired as a viewfinder. Keeping your camera steady is no small feat at the best of times, but being forced to hold the camera away from your body to view an image through the LCD adds a new level of instability to the picture-taking process.
Not finding what you are looking for?

Open Questions:

0answers

Pentax IqZoom 700 film camera E9 error shutter failure Hi, I have a pentax iqzoom 700 that I'd like to repair myself but E9 appears on the lcd screen after inserting a new battery and powering on. Other posts mention this is a shutter failure. When turning on, the zoom lens extends and the outer shutter covering the outside of the lens opens. I've read tutorials that say you can sometimes fix a shutter error by causing a power outage during a shot and opening the battery door while taking a picture, but this isn't possible in my case because no shot is fired when the shutter is pressed, likely because the camera recognizes the shutter failure. I've also watched videos on how to repair leaf shutters and mechanical shutters, but the manual for this camera states the shutter is an AE between-the-lens shutter so I have no idea how to disassemble and fix this sort of thing. Looking thru the lens both thru the front of the camera and in the film compartment on the other side show a dark covering behind the lens even while the outer shutter is open covering the outer lens, which I'm assuming is the between-the-lens shutter. Ideally, I'd like to repair this myself, as there's nothing lost if I screw up and it's not worth it otherwise to take it for repair. I'm a complete novice with absolutely no prior knowledge of taking apart things, but I can follow directions so any suggestions or links to videos/tutorials would be very much appreciated Side note that I've searched the web extensively and have yet to find anything specific to repairing this camera model, and I'm not knowledgeable enough to adapt a tutorial for a different camera to this model Thanks in advance!

See all Olympus D-320L Digital Camera Questions

30 views

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

597 Answers

Ekse

Level 3 Expert

13435 Answers

David Shaub

Level 3 Expert

2994 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...