HP DeskJet 450wbt InkJet Printer Logo

Related Topics:

Question about HP DeskJet 450wbt InkJet Printer

1 Answer

Printer not ataking paper and ink leaks out....help

Posted by Wade Foulkes on

1 Answer


  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Your printer pickup rollers have probably become slick from usage and ink spills. I work on these type problems all the time - inkjet printers are simply as nasty as they come in terms of getting dirty from ink waste. It needs to be disassembled and cleaned, and the pickup rollers cleaned and reconditioned with a rubber restorative. I would probably take it to a reputable, reasonable repair shop.

Posted on Apr 25, 2007

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Ink leaks and pools in right back paper tray and leaks onto desk

it sounds like your collection assembly is full. this is not something you can do anything about. it must be replaced and it will be costly. you are probly better off to replace it

Black ink leaked on inside of printer.

try to replace the defective cartridge by a new one and see printing test result

I have ink leaking and spraying inside the machine!!

Open the cover. Take a lot of tissues. Find where your cartridges are usually located, when they are not printing. There should be a sponge there, which is probably full of ink (that's normal). All you need to do is wipe your printer, especially the sponges. If the cartridges are also leaking, take them out of your printer, put them on some tissue, so the excess ink can drain on the paper. Check the cartridges after several minutes, if they are still leaking, leave them again on some paper or tissue, until they stop leaking.
Hope that helps!

Ink Leaking into bottom of printer and the paper keeps jamming up on the right hand side above the ink leak.

Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Ink blobs on paper

It could be both. Leaky ink can be a problem and that probly is the problem. But, make sure your rollers are clean and cheak that your ink is not leaking. I hope this has helped you.

Leaking black in from the bottom of the printer

actually your printer needs servicing but for temprory solution.take a bunch of tissue paper .keep the printer on and the printer cover open so the cartridge will be in the center.then with the tissue paper place it internally on the side from where its leaking.the sponge which collects the wastage ink is at present got full and now it does not have the capacity to soak the ink.so its leaking.as you will place the tissue papers the ink will be soaked by tissue paper and the sponge will again become bit dry to soak more ink.but its the temprory solution.to make it permanent get the printer serviced and sponge replaced.the problem is not all serious ,its common.every printer comes to this stage after certain usage.and the servicing is the solution.a local printer repair shop also does the servicing job .
hope this helps.

Ink keeps leaking from the printer!

The problems you are experiencing are due to ink buildup in the ink absorbers that reside in the base of the printer. I'm surprised that you did not get a "ink absorber almost full" message. Unfortunately this occurs when more ink (heavy printing) goes in to this area than the ink absorbers can absorb and the ink starts to build up. An ink waste tube feeds in to the absorbers right in the front middle of the printer. When the ink begins to build up, it comes up through the paper platen there in the front causing the ink problems on the back of your paper.

The machine will need to be serviced. Canon suggest replacing all of the ink absorbers which is the easiest thing to do from a Tech perspective. The last machine I had in with this problem, I tore down machine and just rinsed all of the absorbers. You also have to rinse the underside of the paper platen.


Leaking black ink on printed pages

Hi, please attempt to run a numerous blank paper through the printer. This will dry or clean any ink found on the rollers.
Continue to run blank pages through the printer until no more ink is found on the paper, then attempt printing. If ink stains or streaks are still present, the printer may need service.


Printer won't print

Did you peel the piece of paper on the ink cartridge?Or if that doesnt help do this get the cartridge out and then dip some water on the ink leaking part with a piece of paper and well see what will happen.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4362 Answers

Ben Johnson

Level 3 Expert

686 Answers

Cindy Wells

Level 3 Expert

6648 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides